RCA L37WD23 37 INCH LCD TV – FACTORY MODE – WHITE BALANCE ADJUSTMENT – SMPS SCHEMATIC

RCA L37WD23 37 inch LCD TV – Factory Mode – White Balance Adjustment – SMPS schematic

Power supply Circuit diagram_Factory Mode_White balance adjustment_ RCA L37WD23

 White Balance, Luminance Adjustment

Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.

Select channel 03 to adjust the white balance.

The tolerance of the color coordinates should be less than ± 20.
How to setting MEM. channel you can reference to Chroma-7120 user guide or simple use “ SC” key and “ NEXT” key to modify x, y , Y value and use “ID” key to modify the TEXT description.
Following is the procedure to do white-balance adjust.

PC mode
 In the TV mode adjust volume to zero and press number key 9 > 8 > 7 > 6. It will achieve the factory mode. Select the item of White Balance and press right key to enter it.
In the White Balance you can adjust 8 items.
1-3 items is RO, GO, BO > R, G, B Bias adjust.
4-6 items is RG, GG, BG > R, G, B Gain adjust.
7 item needn’t adjust
8 items is color temperature select: Cool, Normal, and Warm.

Bias (Low luminance) adjustment
1. Set the raster pattern (Black pattern with 1024×768) Input.
2. Adjust the brightness on OSD until chroma 7120 measurement reach the lowest value.

Gain adjustment
 Adjust Cold color-temperature
1. Set the Contrast of OSD function to 80 and Adjust Brightness to chroma-7120 Y>400 cd/m2
2. Switch the chroma-7120 to RGB-mode (with press “MODE” button)
3. Switch the MEM. channel to Channel 03 (with up or down arrow on chroma-7120)
4. The LCD-indicator on chroma-7120 will show x =289, y =304, Y>200cd/m2
5. Adjust the 4 item: RG, until chroma 7120 indicator reached the value R=100
6. Adjust the 5 item: GG, until chroma-7120 indicator reached the value G=100
7. Adjust the 6 item: BG, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure until chroma-7120 RGB value meet the tolerance =100±2
9. Switch the chroma-7120 to x, y, Y mode with press “MODE” button to check the color temp is in SPEC. or not.
10. Enter the 8 item to select another color temperature to adjust.

Adjust Normal color-temperature
1. Set the Contrast of OSD function to 80 and Adjust Brightness to chroma-7120 Y>400cd/m2
2. Switch the chroma-7120 to RGB-mode (with press “MODE” button)
3. Switch the MEM. channel to Channel 03 (with up or down arrow on chroma-7120)
4. The LCD-indicator on chroma-7120 will show x =299, y =315, Y>200cd/m2
5. Adjust the 4 item: RG, until chroma 7120 indicator reached the value R=100
6. Adjust the 5 item: GG, until chroma-7120 indicator reached the value G=100
7. Adjust the 6 item: BG, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure until chroma-7120 RGB value meet the tolerance =100±2
9. Switch the chroma-7120 to x, y, Y mode with press “MODE” button to check the color temp is in SPEC. or not.
10. Enter the 8 item to select another color temperature to adjust.

Adjust Warm color-temperature
1. Set the Contrast of OSD function to 80 and Adjust Brightness to chroma-7120 Y>400cd/m2
2. Switch the chroma-7120 to RGB-mode (with press “MODE” button)
3. Switch the MEM. channel to Channel 03 (with up or down arrow on chroma-7120)
4. The LCD-indicator on chroma-7120 will show x =313, y =324, Y>200cd/m2
5. Adjust the 4 item: RG, until chroma 7120 indicator reached the value R=100
6. Adjust the 5 item: GG, until chroma-7120 indicator reached the value G=100
7. Adjust the 6 item: BG, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure until chroma-7120 RGB value meet the tolerance =100±2
9. Switch the chroma-7120 to x, y, Y mode With press “MODE” button to check the color temp is in SPEC. or not.
10. Enter the 8 item to select another color temperature to adjust.

Switch different source

Press the source key on the remote control to switch different source to adjust the AV, HDMI, CONPONENT 480i and COMPONENT 480p mode.
Press “Exit” button on remote control to quit from factory mode.

SMPS SCHEMATIC & PWB