SONY RMVLZ620 CODE FOR BLUE RAY
PROGRAMMING CODE FOR CODE FOR BLUE RAY
DIRECT CODE ENTRY
1.Find
the five-digit manufacturer’s code for the desired device.
If more than one manufacturer’s code is listed, use the code that
is listed first. It is recommended to keep a note of the codes for your
devices, for easy reference later.
2. Press and hold SET for more than 3 seconds.
While keeping SET held down, press the desired Device Select
button, then release both buttons.
The selected Device Select button lights up.
3. Enter the manufacturer’s code
The SET indicator flashes three times, and the indicators turn
off.
The led will flash 3 times
To cancel the process Press SET anytime.
CODE FOR BLUE RAY
Denon 12258
Insignia 10675, 12428, 12596
Integra 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
NAD 12572
Olevia 12331
Onkyo 12147
Oppo 12545
Insignia 10675, 12428, 12596
Integra 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
NAD 12572
Olevia 12331
Onkyo 12147
Oppo 12545
Panasonic 11641
Philips 12084, 12434
Pioneer 10142, 12442
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Viore 12553
Vizio 12563
Yamaha 12298
Philips 12084, 12434
Pioneer 10142, 12442
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Viore 12553
Vizio 12563
Yamaha 12298
CODE SEARCH
1.Power on the device with its power switch.
2. Aim the RM-VLZ620 at the device you want to set.
3. Press and hold SET for more than 3 seconds. {The set
indicator lights up}
While keeping SET held down, press the desired Device Select
button, then release both buttons.
The selected Device Select button lights up.
4. Enter - 2 - 2.
The SET indicator flashes three times to indicate that the setting
mode has been entered. The set led will flash 3 times.
5. Press and hold the play button [ >] to start searching
6. When the device turns off, release the button. If you
overshoot the required code, you can search for the next
or previous code using the next [>>] or previous [<<] button.
or previous code using the next [>>] or previous [<<] button.
7.Press the Enter button.
The SET indicator flashes three times, and the indicators turn
off. Set led will flash 3 times.