REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 8 March 2019

AOC L32W431 HOW TO ENTER SERVICE MODE AND POWER SUPPLY CIRCUIT

AOC L32W431 How to enter service mode and power supply circuit


Contents of this article 

  • Service mode 
  • White balance adjustment
  • Circuit diagram 

AOC L32W431


ENTER FACTORY
Press 1-9-9-9 on remote to enter the menu on top left of the screen),then from UP key(UP) option to enter the menu.
White Balance, Luminance Adjustment
Instrument List:
Chroma 2225,VG848,Chroma 7120
Adjustment Process:
1. Instrument Orientation
Connect LCD-TV,Chroma 2225 and VG848, and set Timing137,Pattern1 on Chroma2225. Chroma7120’s lens
must aim at the center of Pattern1 showed on the LCD-TV’s screen. The distance of Chroma7120’s lens and the
center of screen is 20cm±1cm.
2. ENTER FACTORY
After orientation OK, set Pattern104(black picture) on Chroma225.Press 1-9-9-9 on remote to enter the menu on
top left of the screen(refer to fig.1,this menu will show slowly), then from UP key(△) option to enter the menu
PC Mode White Balance Adjustment
Begin to adjust the W/B (White Balance) you should select the Color Temp(Warm and Cold) and enter the son menu from father menu “Scaler”.
Set channel color temperature value and brightness on Chroma7120.Set 303 319 350(warm Temp) on CH3 and 278 289 350(cold Temp) on CH4.Press MODE key on Chroma7120 to switch xyY mode. Use black sleeve on Chroma7120’s lens to ensure no external ray. 
Set Pattern104 on Chroma2225.Adjust SCALAR RB,GB,BB value to make sure the brightness is the lowest, then set Pattern105 on Chroma2225 and adjust RG,GG,BG value to make the value displaying on Chroma7120 is about 100.Press “Save” to save. 
Switch to CH4, select cold Temp and then adjust it according to above method. Press “Save” to save.
AV MODE W/B ADJUSTMENT
Begin to adjust AV/COMPONENT YPbPr(480I/576I)/COMPONENT T-scaler(480P/720P/1080I) /HDMI W/B, their Color Temp modes
1.OFFSET(26%) W/B ADJUSTMENT(This is only for AV/TV)： Change the input signal to 26% white level performance .Set the CHROMA7120 to 288 301 30 and MODE_RGB ,then adjust the TV’s RB、 GB、 BB to make CHROMA7120 display to 100.

2.W/B ADJUSTMENT (100%): Change the input signal to 100% white level performance. Set the CHROMA7120 to 288 301 415 and MODE_RGB , then adjust the TV’s RG,GG,BG to make CHROMA7120 display to 100.

3.Save the adjustment. Then change the input signal to 26% white level performance. Set the CHROMA7120 to MODE_RGB and CH3, check whether the color temperature was in SPEC (color spec is x±15;y±15;Y±15). In this time, most of the TV is in SPEC, while the others should be adjusted twice or more to make its color temperature in SPEC.

4.CHECK CUT OFF: Change the input signal to 0% white level performance. Firstly, press the “brightness” from 50% to 0% and make sure the Y is not changed. Secondly, change the input signal to 32 GRAYS performance and make sure the grays is not connected at any position.( as the 5% level is between the first gray and the second gray. 5%=（1/32）1.6)

1.The white color temperature in PC Mode should be app.7200K(CIE1931: x=0.303, y=0.319， Y>350), 10300K(CIE1931 : x= 0.278, y= 0.289, Y>350 ).

2.The white color temperature in AV/TV Mode should be app. 8700K(CIE1931:x=0.288±15, Y=0.301±15, Y>370). In this Mode,we should check the black balance,which level is 26% of the white level(1.0Vpp).

3. The white color temperature in HDTV/HDMI Mode should be app. 8700K(CIE1931:x=0.288±15, Y=0.301±15, Y>370)
Those three channels should be factory preset and not be possible to be modified. The measurement position is the center of the display(5) at brightness set to center and Contrast set to max. . The tolerance of the color coordinates should be less than ± 0.015.
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN
Posted By: FRANK at 00:53
TAG: , , ,