REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Thursday 21 March 2019

BENQ W1070 - W1080ST - DIGITAL PROJECTOR - LAMP REPLACEMENT - LAMP TIMER RESET - INDICATIONS

BenQ W1070 - W1080ST - DIGITAL PROJECTOR - LAMP REPLACEMENT - LAMP TIMER RESET - INDICATIONS



LAMP REPLACEMENT
                                                   [Click on images to Enlarge]
  • Turn the power off and disconnect the projector from the power outlet. If the lamp is hot, avoid burns by waiting for approximately 45minutes until the lamp has cooled.
  • Loosen the screw that secures the lamp cover on the side of the projector until the lamp cover loosens.
  • Remove the lamp cover from the projector.
*   Do not turn the power on with the lamp cover removed.
** Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries.
  • Loosen the screw that secures the lamp.
  • Lift the handle so that it stands up.

  • Use the handle to slowly pull the lamp out of the projector.
*  Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector.
*  Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials.
*  Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images.
  • As shown in the figure, lower the new lamp.
  • Tighten the screw that secures the lamp.
  • Ensure the handle is fully laid flat and locked in place.
  • Loose screw may cause a bad connection, which could result in malfunction.
  • Do not over tighten the screw.
  • Replace the lamp cover on the projector.
  • Tighten the screw that secures the lamp cover.
  • Loose screw may cause a bad connection, which could result in malfunction.
  • Do not over tighten the screw.

RESETTING LAMP TIMER
  • Connect the power and restart the projector.
  • After the start-up logo, press MENU/EXIT and then press [ < / > ] until the System Setup :
  • Advanced menu is highlighted.
  • Press [DN] to highlight Lamp Settings and press MODE/ENTER. The Lamp Settings page displays.
  • Highlight Reset Lamp Timer and press MODE/ENTER. A warning message displays asking if you want to reset the lamp timer.
  • Highlight Reset and press MODE/ENTER. The lamp time will be reset to "0".
INDICATIONS
There are three indicators, which show the status of the projector. Check the following for information about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.
WHEN PROJECTOR IS IN ABNORMAL STATE
Posted By: FRANK at 04:19
TAG: , , ,