DVD 4250D – Vestel DVD player How to enter Service Mode – Software Update
CD
Update Procedure of 4250D
1. Download
the update file from the convenient link according to your default language
choice.
2. While there is no CD in the DVD (No Disc Mode). Press “Menu 1 3 5 7” buttons on the remote control in order to reach the Service Menu of DVD Player:
2. While there is no CD in the DVD (No Disc Mode). Press “Menu 1 3 5 7” buttons on the remote control in order to reach the Service Menu of DVD Player:
[Note
the software version described as “b.xx “ to be able to compare the sw. Version
after update process.]
3. Copy the update file to the desktop and rename it according to the update file name in the hidden menu of
the device.
For example
3. Copy the update file to the desktop and rename it according to the update file name in the hidden menu of
the device.
For example
If
C2M1AS__ is written then rename it like C2M1AS__.rom
If P6M1AS__ is written then rename it like P6M1AS__.rom
If P6M1AS__ is written then rename it like P6M1AS__.rom
(If
you receive the update file already renamed (with addition of .rom) from the
customer technical support department by giving the SAP code of the product
then burn the already renamed file with nero program as it is shown below.)
4.
Burn the renamed files by Nero program with below set up.
5.
After burning process is completed, place the update CD into the DVD tray and
press play button.
6.
Wait to see the update process steps as shown below. When the sw. Update is
completed unit will switch itself to standby mode.
7.
Finally, press the eject button and take out the update CD while DVD Player
remains at stand by Mode.
8. Updating process has been completed. To check whether it is updated correctly or not, repeat the first step
for comparing software version
9. If the previous and letter names are different, CD is update has completed successfully. If the name remains same than go through the steps from the beginning.
IMPORTANT NOTE If the AC source breaks down while the updating the unit (main board) will be totally out of order.
8. Updating process has been completed. To check whether it is updated correctly or not, repeat the first step
for comparing software version
9. If the previous and letter names are different, CD is update has completed successfully. If the name remains same than go through the steps from the beginning.
IMPORTANT NOTE If the AC source breaks down while the updating the unit (main board) will be totally out of order.
Brief
Information of Naming the File
Software version differs from each other depending on front models. 23xx and 24xx are called Old VFD and 25xx and 26xx are called Mini VFD. Each character in the file name is an abbreviation of a description as illustrated below.
Software version differs from each other depending on front models. 23xx and 24xx are called Old VFD and 25xx and 26xx are called Mini VFD. Each character in the file name is an abbreviation of a description as illustrated below.
Pay
attention the left side. Select CD and CD_ROM (ISO) on the upper left side of
screen.
> Select
No Multisession.
> Format
is Mode 1
> Leave
the dates as it is
> Leave
it as it is
> Click
the “New” on the upper right corner of the screen.
> Select
your file from file browser then you will see your file in the “Name” section
on the right side and then copy the files to under “Name” section on the left
side.(this is just an example you will see your file name when you are doing this process)
> Click
the “Burns the current compilation”
> Then
you will see this screen and click the “Burn” on the right upper side of screen.
You
will see the next screen and tray will open itself on computer, then place the
CD in CD-ROM And it will start writing. At the end you will see “burn completed”
