REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Monday 18 March 2019

EPSON STYLUS PHOTO - R280 - R285 - R290 - HOW TO ADJUST PG

EPSON STYLUS PHOTO - R280 - R285 - R290 - HOW TO ADJUST PG

PG ADJUST
Adjust the distance between the head surface and the Paper Guide Front Assy (platen) properly and adjust the parallelism on the 0th column side and on the 80th columns side to ensure reliable print quality.  Once the Carriage Assy and/or Adjustment Bushes have been removed or whenever necessary for any other reason, make this adjustment to correct the deviation of the platen gap.
Tools to be used
  • Thickness gauge:  1.15 mm (x2) 1.3 mm (x2)
  • Phillips screwdriver.
  1. The thickness gauge to be used must be free from dust and dirt and from deformation. Be sure to clean it before use.  ! Take care that the Print Head is not soiled or scratched.  To ensure high accuracy of adjustment, install new ink cartridges in the carriage, and move the carriage right and left by pulling the belt without holding the carriage.
  2. Make this adjustment after installing the mechanism unit in the Housing Lower. (Install the Linear Scale after adjustment.)
  3. With EPSON Stylus Photo R280/R285/R290, four stages of PG setting are available by means of the APG Mechanism. However, make this adjustment with the mechanism in the minimum PG position (PG-: 1.2 mm).
PG POSITIONS
PG POSITION AT PG ADJUSTMENT
CLICK ON PICTURES TO ZOOM

Adjustment procedure (Specified PG value: 1.2 ± 0.1 mm)
  • Install new ink cartridges in the carriage.
  • Remove the Cable Holder Frame.
  • Check that the APG Assy and the carriage are in the PG-position.
  • Move the carriage to the centre of the platen, and place 1.15 mm thickness gauge on the left aligning its left edge with the second rib of the Front Paper Guide. And place another 1.15 mm thickness gauge on the right aligning its right edge with the rightmost rib of the Front Paper Guide.
NOTE: The thickness gauge must not be set over the leftmost rib on the Front Paper Guide.
  • Pull the Timing Belt to move the carriage to the left end.
  • If the carriage comes in contact with the gauge, adjust the Left Parallelism Bush to raise the carriage to a position where the Print head does not come in contact with gauge.
  • Pull the Timing Belt to move the carriage to the right end.
  • If the carriage comes in contact with the gauge, adjust the Right Parallelism Bush to raise the carriage to a position where the Print head does not come in contact with gauge.
  • Move the carriage to the middle area of the platen, and place 1.3 mm thickness gauges at the left and right ends of the platen.
  • Pull the Timing Belt to move the carriage to the left end.
  • If the carriage does not come in contact with the gauge, make the adjustment again.
  • Pull the Timing Belt to move the carriage to the right end.
  • If the carriage does not come in contact with the gauge, make the adjustment again.
  • Mark the indicated graduation position of the right and left Parallelism Bush, and tighten the screws.(Screw tightening torque: 0.8±0.1 N•m)
PG ADJUSTMENT-1
PG ADJUSTMENT-2
Posted By: FRANK at 02:18
TAG: , ,