HOW TO PROGRAM WITH ONE FOR ALL URC 3021 UNIVERSAL REMOTE CONTROL
PROGRAMMING PROCEDURE
The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:
- Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
- On the remote control,press a device key once (i.e., DVD/VCR, CBL/SAT,or TV). NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.
- Press and hold SET until the LED (red light) blinks twice, then release SET.
- Use the Manufacturer’s Codes type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice. [If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again]
- Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try an other code to your device brand. {If the device does not have a POWER key, press PLAY.}
- Repeat steps 1 through 5 for each device you want to control.
