BOSE RC PWAII – HOW TO PROGRAM THE REMOTE – CODE LIST FOR TELEVISION

Bose RC PWAII – How to program the remote – Code list for television

PROGRAMMING PROCEDURE

1. Power on your source.
2. Locate the code for your source’s brand in the Universal
3. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release.
For example, to program your TV, press and hold TV.
Only the appropriate source button glows.
4. On the number keypad, enter the code for your source’s brand.
Note: If all six buttons blink three times, you entered an invalid code.
Repeat steps 3 and 4.
5. Press + on the volume button.

6. Test the source for basic functions:
# TV: press the channel buttons. Press MENU. The settings menu appears. Press LEFT and RIGHT to navigate.
# Cable/satellite box: press MENU. The programming guide appears.
Press LEFT and RIGHT to navigate.
# DVD or Blu-ray Disc player: press GUIDE. The settings menu appears. Press LEFT and RIGHT to navigate.
# Game system: press LEFT and RIGHT to navigate through your menu.
7. If your source responds to basic functions, press EXIT to save your settings.

CODE SEARCH 

Use the remote control’s code scanner to find the code for your source.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for your source.
2. Test the source for basic functions (see step 6 in “Program the remote to control your source”).
3. Repeat steps 1 and 2 until your source responds.
4. Press EXIT to save your settings.

CODE LIST FOR TELEVISION

A

Aaxa  6132
Acer  1652
Admiral  0182
Advent  1754
Affnity 6190
Aiwa 0406
Akai 0098
Akura  0042
AOC 0137
Apex Digital  1550
Ario  7710
Astar  3127
Asus 4030
Atvio  6133
Audiosonic 0103
Audiovox  0105
Auria  4770
Aventura  2561
B

B & O  5274
Bang & Olufsen  0118
Baysonic 0465
BenQ  2391
BGH 3478
Blue Light  6152
Blue Sky  0134
Britânia  5900
Broksonic  0184

C

CCE  0160
Celera  1900
Champion 2647
Changhong 1766
Citizen 0046
Claris  6616
Coby 2056
Commercial Solutions  2427
Conia  1806
Contex 4280
Continental  4261
Coradir 4735
Cornea 4957
Craig 0161
Curtis 1897
Curtis Mathes  0039
Cytron 1594
D

Daewoo  0092
Daytek  2024
Dell  2064
Digital Projection Inc  3563
Disney 2440
Dukane  7825
Dumont 0256
Durabrand  2191
Dynex  3686
E

Electric Mirror  4894
Electrograph 2534
Electrohome  0381
Electron  1898

Elektra  1132
Element  3682
Elite 0274
Emerson  0236
Envision  0278
Epson  2108
ESA 2420
F

Fair Mate  6083
Favi 7763
Fisher 0154
Fluid 4827
Fujimaro 2746
Funai 0179
G

Gateway  1168
GE 0027
General Electric  1885
GFM 4001
Gibralter 0333
GoldStar  0056
GPX  1720
H

Haier  1767
Hallmark  0351
Hannspree  3236
H-Buster 5926
Hewlett Packard 1671
Hisense 2159
Hitachi  0145
HP 2271
Hyundai  1206
I

iLo 2464

InFocus 0995
Initial  2017
Insignia  2471
Inteq  0893
iRIS 4055
IRT  1830
iSymphony 3863
J

JCM 4630
Jensen 0405
JVC 0053
K

KDS  3383
Ken Brown 2620
KLH 0408
Konka  1235
L

Lexus 6146
LG 0511
LodgingStar 4868
LXI  0148
M

MAG  3384
Magnasonic 0848
Magnavox 0054
Marantz  0128
Matsushita 0478
Maxent 2434
Megatron  0485
Memorex  0037
MGA  0155
Microsonic 4673
Midland 0493
Mintek 1788

Miray 4998
Mitsubishi  0150
Mitsui 3847
Mx Onda 1629
N

NAD  0513
Naoki  6147
Naxa  3571
NEC  0170
NetTV 2539
New Acoustic Dimension  5601
Nexus Electronics 4032
Nikko  0529
Nimbro 4143
Noblex  0534
Norcent 1838
Nordmende 0537
NuVision  3355
O

Ölevia 5964
Optimus 0546
Optique 6677
Orion 0549
Otic 2443
P

Panasonic 0051
Panavox 4496
PARK  4065
Philco 0030
Philips 0081
Pioneer  0166
Planar  3573
Polaroid  2163

Portland 0582
Prima  0586
Prism  0588
Proscan  0883
Proton 0031
Proview 2133
Pulsar  0599
Pyle 2421
Pyle Home 5674
Q

Quasar 0055
R

RCA  0047
Realistic 0420
Runco  0632
S

Sampo 0032
Samsung  0060
Sansui 0067
Sanyo  0159
Sceptre 2541
Scotch  0855
Scott 0309
Sears  0146
Seiki 6024
Seiko Epson  5721
Seleco 0672
Semivox 0948
Semp  0949
Semp Toshiba 5722
Serie Dorada 2906
Sharp 0093
Sigmac  5138

Silo 5740
Silo Digital  5977
Sony  0000
Soundesign  0178
Spectroniq 3385
Speler  8195
Squareview 0706
STI  6483
SunBriteTV  3117
Superscan  2222
Supersonic  2544
SVA 1813
Sylvania  0024
Symphonic  0171
Syntax  2432
T

Talent  3318
Tatung 0049
TCL 2231
Technics  0250
Techwood 0750
Teknika  0322
Telefunken  0757
TMK 0736
TNCi  1736
Tophouse 2157
Tosaki  6145
Toshiba  0156
TruTech  3444
TVS 2032
V

Victor  0809

Vidikron 0814
Vidtech  0815
Viewsonic  1805
Viore  3579
VisionQuest  4494
VIZIO 2215
Vuon  4421
W

Waycon 1700
Westinghouse 2258
White Westinghouse 0830
Wyse 2422
Z

Zenith  0017

SHARP LC-60EQ10U - HOW TO ENTER SERVICE MODE, ADJUSTMENTS, PUBLIC MODE, FACTORY SETTINGS AND MORE

Sharp LC-60EQ10U - How to enter service mode, adjustments, public mode, factory settings and more

ADJUSTMENT PROCEDURE
The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is required due to part replacement, make an adjustment according to the following procedure.
After replacement of any PWB unit and/or IC for repair, please note the following.
• When replacing the following units, make sure to prepare the new units loaded with updated software.
MAIN Unit: DKEYMG381FM01, DKEYMG382FM01
LC-60/70EQ10U
LC-60/70SQ10U
LC-60/70SQ15U
LC-60/70SQ17U
LC-60/70TQ15U
LC-60/70UQ17U
When replacing the LCD control PWB, perform the VCOM adjustment.
Upgrading of each microprocessor software
CAUTION: Never “POWER OFF” the unit when software upgrade is ongoing. Otherwise the system may be damaged beyond recovery.

Software version upgrade
The model employs the following software.
• Main software (please use a software version after ASTN_UQ17U_xxx.USB).
• Monitor microprocessor software (please use a software version after ASTNMxxx.SMB.)
The main software, monitor microprocessor software can be upgraded by using a general-purpose USB Memory.
The followings are the procedures for upgrading, explained separately for the main software, monitor microprocessor software.

Main software version upgrade

Get ready before you start
• USB Memory of 128MB or higher capacity.
• PC running on Windows 98/98SE/ME/2000/XP operating system.
• USB Memory reader/writer or PC with a USB port.
• The file system of a USB memory is FAT. (FAT32 supports)
• Use the USB memory without other functions. (lock and memory reader...etc)

Preparations

To upgrade the main software, it is necessary to get ready the USB Memory for version upgrade before you start.
Follow the steps below and create the USB Memory for version upgrade.
1. Copy the file ASTN_UQ17U_xxx.USB for version upgrade to the root directory (folder) of the USB Memory.
NOTE: In the USB Memory drive, do not store other folders or unrelated files, or more than one file for version upgrade.
Now the USB Memory for version upgrade is ready.

How to upgrade the software
1. Unplug the AC cord.
2. Insert the USB Memory for version upgrade into the service socket.
3. Plug in the AC cord with power button pressed down.
4. After 5 seconds, unpress the power button.
5. After the unit startup, the system upgrade screen as shown below within 20-40 seconds.

6. Even a single failure in the process will trigger the upgrade failure screen.

NOTE: In the event of a failure, repeat the upgrade process. If the process repeatedly fails, it is likely that the hardware need fixing.
7. Upon completion of the whole process, the upgrade success screen as shown below appears. You can check the new software version on this screen. The version information appears after the upgrade is complete.

8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the main software version information.

Monitor microprocessor software version upgrade
Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version upgrade”.
Copy the file ASTN_UQ17U_xxx.USB and ASTNMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB memory.

How to upgrade the software
1. Unplug the AC cord.
2. Insert the USB Memory for version upgrade into the service socket.
3. Plug in the AC cord with power button pressed down.
4. After 5 seconds, unpress the power button.
CAUTION: • The moment this operation is done, the upgrading of the monitor microprocessor software starts. While the upgrade is ongoing, never power off the unit. Otherwise the upgrade will fail and the system may be serious damaged beyond recovery (inability to start).
• After the monitor microprocessor software is upgraded, also perform the ‘Industry Init’.
5. After the unit startup, the upgrade starts. The power led will blink continuously. Also, an upgrade screen will be shown during a minor upgrade.

6. If the upgrade fails, power led will stop blinking. Also, the upgrade failure screen will be shown.

NOTE: In the event of a transient failure, upgrade will be automatically retried up to three times. If the process repeatedly fails, hardware may be the cause.

7. The upgrade success screen will be shown.

8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the monitor microprocessor software version information and panel size information.

Entering and exiting the adjustment process mode

1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu.

2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power.

The letter “<K>” appears on the screen.

3) Next, hold down the “VOL (–)” and “CH (Dn )” keys at a time.

(The “VOL (–)” and “CH (Dn )” keys should be pressed and held until the display appears.)

Multiple lines of blue characters appearing on the display indicate that the unit is now in the adjustment process mode.

When you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.

4) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to make a forced shutdown. (When the power was turned off with the remote controller, once unplug the AC cord and plug it again. In this case, wait 10 seconds or so before plugging.)

CAUTION: Use due care in handling the information described here lest your users should know how to enter the adjustment process mode. If the settings are tampered in this mode, unrecoverable system damage may result.

Remote controller key operation and description of display in adjustment process mode and service mode display descriptions.

Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.

Key writing

EDID writing (Main PWB: QPWBXG381WJ**/QPWBXG382WJ**)
1. Write the EDID key data on IC3103 mounted on the main PWB.
2. Carry out thorough data management to avoid redundant writing of data.
If the IC where data is written is damaged, replace the PWB since only the IC cannot be changed.

MAC key writing (MAIN PWB: QPWBXG381WJ**/QPWBXG382WJ**)
1. Write the NETFLIX/WMDRM key data on IC3103 mounted on the main PWB.
2. Carry out thorough data management to avoid redundant writing of data.
If the IC where data is written is damaged, replace the PWB since only the IC cannot be changed.

NETFLIX/WV(RoxioNow)&WMDRM key writing HDCP 2.2(Miracast) (MAIN PWB: QPWBXG381WJ**/QPWBXG382WJ**)
1. Write the wide vine key data on IC3103 mounted on the main PWB.
2. Carry out thorough data management to avoid redundant writing of data.
If the IC where data is written is damaged, replace the PWB since only the IC cannot be changed.
NOTE: For EDID of the analog RGB (DSUB 15pin), write the data on the process menu just like HDMI.

* Update Logic Serial No. writing (MAIN PWB: QPWBXG381WJ**/QPWBXG382WJ**)

Factory setting

After completing the factory setting, pull out the AC cord to complete the setting.

CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again.

Software version
1. Main microprocessor
ASTN_UQ17U_xxx.USB
ASTN_UQ17U_xxx.DAT
ASTN_UQ17U_xxx_CHK.USB
ASTN_UQ17U_xxxxxxxx.PCC
2. Monitor microprocessor
ASTNMxxx.SMB
3. T-CON ROM
APRICOT_****************.ROM

Writing the inch and model name onto EEPROM
1. Enter the adjustment process mode.
2. Point the cursor to [MODEL NAME] (Page 28/28).
3. Select "EQ10U" or "SQ10U" or “SQ15U” or “SQ17U”or “TQ15U”, and press [Enter] key.
4. "OK" is displayed.
5. Point the cursor to [PANEL SIZE] (Page 28/28).
6. Select "60" or "70" or "80" and press [Enter] key.
7. Moments later image is displayed.
8. Turn off power
9. Turn on power.

Check MIRACAST HDCP (EQ/SQ/TQ/UQ models)

After changing to New Main board , change "Model and Panel Size" and write "Serial Number", then please check if MIRACAST HDCP is written or

not.

1) Models which MIRACAST HDCP is needed

EQ/SQ/TQ/UQ models should have MIRACAST HDCP written because they are models which have miracast feature.

Please check after changing main unit and make sure that MIRACAST HDCP is written.

How to check

1. Enter the adjustment process mode.

2. Look at MIRACAST HDCP on the 1st page.

Example: LC-60EQ10U

CAUTION: When reusing the main units taken from other TV sets, be aware not to use main units taken from TV sets of LE642UA/LE650UA/LE657UA models.

LE642UA/LE650UA/LE657UA models are shipped out with MIRACAST HDCP not written when production.)

Example: LC-60LE650UA

How to White Balance Data Copy

NOTE: This is only available when it's possible to enter the adjust process mode.

Get ready before you start

• USB Memory of 128MB or higher capacity.

• PC running on Windows 98/98SE/ME/2000/XP operating system.

• USB Memory reader/writer or PC with a USB port.

• The file system of a USB memory is FAT. (FAT32 supports)

• Use the USB memory without other functions. (lock and memory reader...etc)

• Use the USB memory without other files.

Before change Main Board

Enter the adjustment process mode and go to page where it has "USB BACKUP".

Insert the USB Memory into the service socket.

Press Enter, return "Backup OK"

Written AQUOS_DATA.dat into USB Memory.

After change Main Board

Entering the adjustment process mode Enter the adjustment process mode and go to page where it has "USB RESTORE".

(Same page as where "USB BACKUP" was.)

Insert the USB Memory written AQUOS_DATA.dat into the service socket.

Press Enter

After about 7 second , return "Restore OK"

PUBLIC MODE SETTING PROCEDURE

How to start Public Mode

• There are the following two ways to get the public mode setup screen displayed.

In the adjustment process mode, turn on “PUBLIC MODE”. Also press the “CH ( )” and “VOL (+)” keys on the set at once and turn on the power.

1) Press the “INPUT” and “VOL (+)” keys on the set at once and turn on the power.

2) Get the password input screen displayed.

3) The 3-digit password is now verified.

The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever adjustment process settings.)

With any other passwords, the screen changes to the normal mode.

How to exit Public Mode

There are the following ways to quit the public mode setup screen.

• Turn off “PUBLIC MODE” in the adjustment process mode. ( ) ← This way alone is not for quitting the setup screen, but for quitting the mode itself.

• Turn off the power with the “POWER” key. ( )

• Select “EXECUTE”. ( )

 “PUBLIC MODE” stays on in the adjustment process mode.

 The settings will be back to the factory ones.

Public Mode Menu

The guidance is not displayed on screen.

Setup procedure

• To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH (Up )/(Dn )” key (remote controller and set).

• To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).

• To save new settings, keep the cursor at “EXECUTE” and use “ENTER” key (remote controller and set)

How to use USB clone

This is the function that copying the one TV's user setting to other TVs or copying previous user setting to itself.(Only same series.)

1. Insert the USB memory to TV.

2. Insert AC code of TV with pushing the “INPUT” and “Vol+” keys which are on the tact key.

3. Enter the password by using R/C. The password is “027”.

4. Select “COPY MODE”.

5. The follow guide is displayed. Then select the “TV→USB [Start]”.

6. Follow guide is displayed when it is finished, then select "Reset" . TV will restart.

7. Insert the USB which has the data from TV to another TV or itself.

8. Insert AC code of the TV with pushing the "INPUT" and "Vol+" keys which are on the tact key.

9. Select “COPY MODE”.

10. The guide is displayed. Then select the “USB→TV [Start]”.

11. Follow guide is displayed when it is finished, then select "Reset" . TV will restart.

12. Confirm the user setting is copied.

ELECTROLUX WASHING MACHINE - DIAGNOSTIC MODE – FACTORY RESET – INSTALLATION CYCLE MODE

Electrolux Washing machine - Diagnostic mode – Factory reset – Installation cycle mode

Electrolux Washing Machine: How to access Diagnostic Mode

# Press the Cancel button to enter standby mode and enable diagnostic entry.
# Within 10 seconds after pressing Cancel , press any button to wake up the control.
# Within 5 seconds of wake up, turn the selector knob to the far left cycle and press and hold Cancel and far left button under the display simultaneously for 3 seconds to enter the diagnostic mode.

1. Upon entering diagnostic mode, all lights should flash for 1 1/4”x2” display models and all lights on for the 1 1/4” x 4 3/4” display models.
2. Turn the program knob (1) click clockwise from the start position. The hot water solenoid will activate and hot water should enter through the detergent compartment.
3. Turn the program knob (2) clicks from the start position. The bleach water solenoid will activate and cold water should enter through the bleach compartment.
4. Turn the program knob (3) clicks from the start position. The bleach and the wash water solenoids will activate and cold water should enter through the softener compartment.
5. Turn the program knob (4) clicks from the start position. The prewash solenoid will activate and cold water should enter through the prewash compartment.
6. Turn the program knob (5) clicks from the start position. The door lock solenoid will deactivate and the loading door can be opened. When the door is opened, the drum light should turn on.
7. Turn the program knob (6) clicks from the start position. The door lock will activate and the washer will fill then tumble. Once tumbling has started, the boost heater will turn on.
8. Turn the program knob (7) clicks from the start position. The drain pump will activate draining out any water in the tub and the washer will operate in high spin.
9. Turn the program knob (8) clicks from the start position. This is a free position.
10. Turn the program knob (9) clicks from the start position. The control will signal the last 5 error codes with E00 being no error.
11. Turn the program knob (10) clicks from the start position. Latest software version will be shown.
12. If applicable, turn the program knob (11) clicks from the start position. This is a free position.

Exiting Diagnostic Mode
A) Unplug the power cord, wait 5-8 seconds, then reconnect the power cord or
B) Turn the program knob clockwise back to the start position. Press the Cancel and far left button under the display
until the LED’s stop flashing

Factory Reset
1) On 1 1/4” x 2” display models, wake machine, push the Spin Speed and Soil Selection keys simultaneously and hold until you hear a beep. This is no more than 10 seconds.
2) On 1 1/4” x 4 3/4” display models, scroll through the Option key until you get to the Preference Selection (pref). Once there, push the Select key then scroll through this menu until you get to the Reset Selection and push the Select key. From here, you have the selection of the type of reset you wish to perform. Make your selection and push the Select key. The machine will turn off and when woken up, the part(s) of the program you wanted reset are now set back to factory settings.

How to enter to Installation Cycle mode
Before entering the Installation Cycle (install cycle) make sure that all articles are out of the drum (the drum is empty).
1 1/4” x 2” display models:
1. Wake the washer up by pressing any button (except the Cancel button).
2. Rotate the cycle knob to the Hand Wash cycle.
3. Press the Start/Pause button, then the Cancel button.
4. Wake the unit up again, immediately and simultaneously press and hold the My Favorites and Eco Friendly buttons for 5 seconds. The display will show install cycle with the estimated time of cycle completion.
5. Press the Start/Pause button to begin the cycle. Installation Cycle will test for electronic issues, wiring issues and water flow issues. At cycle completion, the display will show instal pass! or prompt an action during the cycle such as call service, no water or check hoses. Correct the action and repeat the cycle for proper installation. Washer will exit the install cycle and return to normal operation the next time the knob is turned.

1/4” x 4 3/4” display models:
The machine will first wake up on setting up the unit to display language selection. 

Press next to display the install cycle. You can run it now if you choose. If you don’t want to run it immediately, you can access the install cycle through the pref menu in the option window. 

Press the Select key once you scroll to the pref selection. Then scroll through this menu until you get to the install cycle. 

Press the Select key then follow the instructions (remove all articles from the washer drum). You can also get to this cycle by performing a full reset of factory settings.
How To Clear The Last Stored Error Codes
# Press the Cancel button to enter standby mode and enable diagnostic entry.
# Within 10 seconds after pressing Cancel, press any button to wake up the control.
# Within 5 seconds of wake up, turn the selector knob to the far left cycle and press and hold the Cancel and the far left button under the display simultaneously for 3 seconds to enter the diagnostic mode.

# Turn the program knob clockwise (9) clicks from the start position. The control will signal the last 5 error codes with E00 meaning no error experienced.
# Press and hold the far left key under the display and Cancel buttons simultaneously for 3 seconds. The code(s) will be cleared.

SYLVANIA, EMERSON AND MAGNAVOX 19 INCH LCD TV – HOW TO ENTER SERVICE MODE, ADJUSTMENTS, INITIALIZATION AND SCHEMATICS AND MORE

Sylvania, Emerson and Magnavox 19 inch LCD TV – How to enter service mode, adjustments, initialization and more

Applicable to: Sylvania LC195SLX, Emerson LC195EMX, Magnavox 22MF339B/F7 and many more models of these brands 19 inch LCD TVs. HOW TO INITIALIZE THE LCD TV

The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
1. Turn the power on.
2. To enter the service mode, press the service button on the service remote control unit.
- To cancel the service mode, press [POWER] button on the service remote control unit.
3. Press [INFO] button on the service remote control unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is complete.

FIRMWARE RENEWAL MODE

Equipment Required

a. USB memory
b. Remote Control Unit

Firmware Update Procedure
Note: There are two states (the User Upgrade and the Factory Upgrade) in firmware update.

The identification of User Upgrade and Factory
Upgrade are done by the filename.
1. Turn the power off and unplug the AC Cord.
2. Insert the USB memory to the USB port.

3. Plug the AC cord in the wall outlet and turn the power on.
4. The update will start and the following will appear on the screen.

“Software upgrade in progress. Please wait.
Do not remove the USB device or turn the TV off while upgrade is in progress”

If the above screen isn’t displayed, repeat from step 1

5. When the firmware update is completed, the screen will be displayed.

Unplug the AC cord and kindly remove the USB memory from the USB port. Plug the AC cord in the wall outlet again and turn the power on.
Note:
When the Factory Upgrade is used, after restarting TV, shift to initial screen menu in service  mode. "INITIALIZED" will appear on the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is complete.

Service mode

Electrical adjustments are required after replacing circuit components and certain mechanical parts. It is important to perform these adjustments only after all repairs and replacements have been completed.  Also, do not attempt these adjustments unless the proper equipment is available.

Test Equipment Required
1. NTSC Pattern Generator (Color Bar W/White Window, Red Color, Dot Pattern, Gray Scale, Monoscope, Multi-Burst)
2. Remote control unit
3. Color Analyzer.

How to make the Service remote control unit:
[LC195SLX, LC195EMX]

Cut “A” portion of the attached remote control unit as shown in Fig.

[22MF339B/F7, 19MF339B/F7]
Cut “A” portion of the attached remote control unit as shown in Fig.

[LC225SSX, LC195SSX]
Cut “A” portion of the attached remote control unit as shown in Fig.

How to set up the service mode:
How to enter the Service mode:
1. Use the service remote control unit.
2. Turn the power on.
3. Press the service button on the service remote control unit. The service mode screen appears.

LC195SLX, LC195EMX, LC195SSX, 19MF339B/F7 – SMPS section schematic

22MF339B/F7, LC225SSX – Back-light inverter schematic

22MF339B/F7, LC225SSX – SMPS section schematic

Purity Check Mode
This mode cycles through full-screen displays of red, green, blue, and white to check for non-active pixels.
1. Enter the Service mode.
2. Each time pressing [7] button on the service remote control unit, the display changes as follows.

VCOM Adjustment

1. Operate the unit for more than 20 minutes.
2. Set the color analyzer and bring the optical receptor to the center on the LCD-Panel surface after zero point calibration.
Note: The optical receptor must be set perpendicularly to the LCD Panel surface.
3. Enter the Service mode.
4. Press [3] button on the service remote control unit.
5. Press [CHANNEL UP/DOWN] buttons on the service remote control unit so that the color analyzer value becomes minimum.

The white balance adjustment should be performed when replacing the LCD Panel or Digital CBA.
3. White Balance Adjustment
Purpose: To mix red, green and blue beams correctly for pure white.
Symptom of Maladjustment: White becomes bluish or reddish.

Operate the unit for more than 20 minutes.
2. Input the White Raster(70%=70IRE, 40%=40IRE).

3. Set the color analyzer to the CHROMA mode and bring the optical receptor to the center on the LCD-Panel surface after zero point calibration.
Note: The optical receptor must be set perpendicularly to the LCD Panel surface.
4. Enter the Service mode. Press [VOLUME DOWN] button on the service remote control unit and select “C/D” mode.

5. [CUTOFF]
Press [1] button to select “COR” for Red Cutoff adjustment. Press [3] button to select “COB” for Blue Cutoff adjustment.
[DRIVE]
Press [4] button to select “DR” for Red Drive adjustment. Press [6] button to select “DB” for Blue Drive adjustment.
6. In each color mode, press [CHANNEL UP/DOWN] buttons to adjust the values of color.

HOW TO CONNECT A MOBILE DEVICE TO SAMSUNG CURVED TV - DNLA HOME NETWORK – SCREEN MIRRORING – CONNECTION MOBILE WITHOUT WI-FI ROUTER

How to Connect a mobile device to Samsung curved tv - DNLA Home network – Screen mirroring – Connection mobile without wi-fi router

Samsung curved TV: Connecting Through Samsung Link

Quickly access photo, video, and music files saved on a computer on which Samsung Link software is installed. In addition, using Samsung Link, you can view or play the content of a computer which is registered with Samsung Link through your Samsung account, even if the computer and the TV are not connected to the same router or AP.
1. On a computer, navigate to the Samsung content and service portal and then sign into your Samsung account.
To install the Samsung Link desktop software, you need to sign into your Samsung account. If you don't have a Samsung account, create one first.
2. Install the Samsung Link desktop software. When the installation is complete, the computer will be registered with Samsung Link.
3. Specify a folder on the computer to connect to the TV. You can view or play the photo, video, and music files in the specified folder on the TV. 

Connecting Through DLNA Using Your Home Network
Quickly access and play photo, video, and music files stored on a computer on the TV.
1. Connect the TV and the computer to the same router or AP. Once you connect them to the same router or AP, a home network is configured.
DLNA is the technology that lets TV's, computers, and mobile devices connected to one wired or wireless router share content.
2. On the computer, select [Control Panel] > [Network and Internet] > [Network and Sharing Center] > [Change advanced sharing settings], and then select [Choose media streaming options...] to activate media streaming.
3. From the list, set the TV to [Allowed].
4. Launch Windows Media Player on a computer. Select [Settings] > [Library Management], and then add the location where photo, video, and music files are saved to play them on the TV.

Connecting To a Mobile Device

You can connect a mobile device such as a smartphone or tablet directly to the TV, or connect it to the network and display the mobile device's screen or play its content on the TV. The kinds of connections you can make are listed below.
Connect Using an MHL to HDMI cable
Connect the USB port of the mobile device and the HDMI port of the One Connect with an MHL to HDMI cable to view the mobile device's screen on the TV screen.
Connect by Mirroring the Mobile Device's Screen on the TV (Screen Mirroring)
Wirelessly connect the TV and the mobile device with the mirroring function. You can view the mobile device's screen on the TV screen.
This option is available only on a mobile device that supports the mirroring function.
Connect Mobile Devices without a Wireless Router (Wi-Fi Direct)
Wi-Fi Direct enables you to connect the TV and the mobile device without a router or AP. Quickly access and play photo, video, and music files in the connected mobile device on the TV.
This option is available only on a mobile device that supports the Wi-Fi Direct function.
Connect Through Samsung Link
Samsung Link enables you to play photo, video, and music files saved on a Samsung Linkenabled mobile device easily, without the need for a connection to the TV.
Connect Through DLNA Using Your Home Network
You can conveniently play photo, video, and music files saved on a mobile device by connecting the mobile device and the TV to the same router or AP.
Connect via Smart View 2.0
Install and run the Smart View 2.0 app on your mobile device, and connect your mobile device to the TV on the same network. However, Smart View 2.0 does not work when this function is in use.
# When you are playing UHD-level video saved on a USB device
# When viewing the digital channel with UHD-level resolution

Connecting With an MHL to HDMI Cable
MHL (Mobile High-definition Link) lets you display a mobile device’s screen on the TV. However, MHL is only available through the TV's HDMI (MHL) port and only when used in conjunction with an MHL-enabled mobile device.
Connecting the MHL-to-HDMI cable automatically switches Picture Size to Screen Fit. This setting will not change automatically if you are using an HDMI adapter. In this case, change the settings manually in the menu.
If you are using an HDMI adapter, the TV recognizes the signal as an HDMI signal and may respond differently than it would to an MHL to HDMI cable connection.
HDCP 2.2 is supported only by the TV's HDMI (MHL) port. HDCP is short for "High bandwidth Digital Content Protection" and is used for video copyright protection.Once the connection has been made, press the SOURCE button to select the connected external device.

Screen Mirroring
MENU > Network > Screen Mirroring
Wirelessly connect a mirroring-enabled mobile device to the TV and play the video and audio files stored on the device on the TV.
To use the Screen Mirroring function, the mobile device must support a mirroring function such as AllShare Cast or Screen Mirroring. To check whether your mobile device supports the mirroring function, please visit the mobile device manufacturer's website.
The video or audio may intermittently stop depending on network conditions.
Connecting via a mobile devicce.
1. On the mobile device, run Screen Mirroring. The mobile device searches for available devices to connect to.
2. In the search result list, select the TV. The TV displays a pop-up at the top of the screen.
3. In the pop-up, select Allow to connect the mobile device.
All previously allowed mobile devices will automatically connect without needing approval.
If you select Deny, the device cannot connect. In addition, you are setting the device's connection status to Deny and it will not be able to connect in the future unless you change its connection status. To change the connection status of a denied device, Navigate to Network > Screen Mirroring > Device Manager, select the device, and then select Allow.

Connecting by Automatically Allowing the Connection
1.Navigate to Network > Screen Mirroring, and then select Screen Mirroring. The Screen Mirroring function starts. You can also start screen mirroring by pressing the SOURCE button on your remote, and then selecting Screen Mirroring from the list at the top of the screen.
2. Launch Screen Mirroring on your mobile device. The device searches for available devices.
3. Select the TV from the list. The TV automatically allows the connection and the device connects.
 If the mobile device cannot connect, try turning the TV off and on.
Managing the Connection Status of Previously Connected Mobile Devices
This function is only available if devices have previously connected to the TV or have previously attempted to connect and been denied.
1. Navigate to Network > Screen Mirroring > Device Manager. The TV displays a list of devices that have previously connected to the TV or have tried to connect to the TV and been denied. The status of the connection (Allow/Deny) is also displayed.
2. Select a device. A pop-up appears.
3. In the pop-up, you can select Allow connection, Deny connection, or Delete the device from the list.

Connecting Mobile Devices without a Wireless Router (Wi-Fi Direct)
Navigate to MENU > Network > Wi-Fi Direct Try Now
You can connect a mobile device with the Wi-Fi Direct feature directly to the TV without using a wireless router or AP. By connecting a mobile device to the TV through Wi-Fi Direct, you can play photo, video, and music files saved on the mobile device on the TV.
This option is available only on a mobile device that supports the Wi-Fi Direct function. Please check if your mobile device supports Wi-Fi Direct.
1.Enable Wi-Fi Direct on the mobile device, and then navigate to Network and select Wi-Fi Direct on the TV. The TV automatically scans for and displays a list of available devices. The TV's name also appears on the mobile device.
2. Select the device from the list to initiate a connection. If a connection request is made by the TV,
a permission message appears on the mobile device and vice versa.
3. Allow the connection. The TV and mobile device connect.

Connecting Through Samsung Link
Samsung Link lets you play the photo, video, and music files saved on a Samsung Link-enabled mobile device. In addition, using Samsung Link, you can play the content of a mobile device, which is registered to Samsung Link through your Samsung account, even if the mobile device and the TV are not connected to the same router or AP.
1. Run the Samsung Link app on the mobile device, and then sign in to your Samsung account.
To use Samsung Link, you have to sign in to your Samsung account. If you don't have a Samsung account, create one first.
2. Access and play photo, video, and music files saved on the mobile device. 

Connecting Through DLNA Using Your Home Network
Quickly access and play photo, video, and music files stored on a mobile device on the TV.
1.Connect both the TV and the mobile device to the same router or AP. Once you connect them to a single router or AP, a home network is configured.
" DLNA is the technology that lets TV's, computers, and mobile devices connected to one wired or wireless router share content.
2. Enable File Sharing on the mobile device. You can play the content shared on the mobile device on the TV.