Master Electronics Repair !

Welcome to Master Electronics Repair! website.Here you will find:Service Modes, Circuit Diagrams,Service manuals, Firmware Update procedure, Disassemble procedure, Universal remote control setup codes, Troubleshooting, Diagnosing, Measuring, and more.... of many of LCD/LED TV/Displays,others various electronic apparates,trough many technical notes and tips/tricks to help repairing/fixing Troubles/ faults,for electrical technicians.This site helps you to save the Earth from electronic waste!

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!

Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:

- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday, 5 March 2019

PANASONIC 4K VIDEO CAMERA HC-X1000 - SERVICE MODE – ERROR CODES – TOUCH PANEL CALIBRATION – MEMORY BATTERY REPLACEMENT – DIGITAL CAMERA REPAIR AND SERVICE

PANASONIC 4K Video Camera HC-X1000 - Service mode – Error codes – Touch panel calibration – Memory Battery replacement – Digital Camera Repair and service

Category: Digital Camera Repair and Service

Contents of this article

How to access service mode
Service mode adjustments
Error codes
Memory battery replacement

PANASONIC HC-X1000

Service Mode

Indication method of the service menu
1. Set the power switch to ON, and turn to ON.
2. While pressing the “MENU”button to “FOCUS ASSIST”button and “Zoom Lever” (or “Sub zoom lever”) to W side for more than 3 seconds until the top screen of the Service Mode Menu being displayed.

Service mode menu

Screen display	Contents	Function
1	Factory settings	Function to throw a product up in a factory shipment state.
2	Model/Destination settings	Change the Model/Destination. (Selectable models and destinations are displayed.)
4	Lock search history indication	Display the camera system and fan system error code for three histories saved in EEPROM.
5	Power ON self check result display	Power ON self check (function to diagnose correct function of the device and interface between devices) result display.
14	Adjutment function for the service	The service adjustment do setup and adjustment of the following items required in the field service.
15	Restore the backed up adjustment data	Restore the adjustment data to new or repaired Main P.C.B. from SD card that the data backed up from original Main P.C.B. before repairs or replacement.
16	Touch panel calibration	Calibrate the touch positions of the touch panel.
17	NFC initialization	Performs the Initialization of the NFC chip and erase the settings like as Wi-Fi connection etc..

NOTE:

Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Touch the [ EXIT ] of LCD to end the service mode, and then POWER OFF.

Model/Destination Settings
Touch the [ 2 ] of LCD, select model/destination settings.

Function description
# Change the Model/Destination
Display the lists of model/distination which the unit can be changed, if a shipment setup is finished.
Therefore in some cases, the model/destination that is currently set is only displayed.
End method of operation
# Touch the [ SET ] of LCD to exit the mode/destination settings, and then POWER OFF.

Lock Search and Error History Indication
Touch the [ 4 ] of LCD, select Lock search and error history indication.

Indication contents
# Lock search history indication of camera
Display the camera system and fan system error code for three histories saved in EEPROM.
# The error code contents which are displayed

Error code	Description
51	Focus control is abnormal
52	Zoom control is abnormal
53	OIS lens control is abnormal
54	Zoom control is abnormal (2)
55	Zoom control is abnormal (3)
72	Fan is abnormal

End method of operation

# Touch the [ BAK ] of LCD to exit the lock search and error history indication, and then POWER OFF.

Power ON Self Check Result Display
Touch the [ 5 ] of LCD, select Power ON self check result display.

Indication contents
# Power ON self check result display
Function to diagnose correct function of the device and interface between devices result display.
Display the following communication test result.
- Power IC : Communication test between IC3401 and IC2303
- Main IC : DDR. Communication test inside IC3401
- WiFi IC : Communication test between IC3401 and Wi-Fi Module
- NFC IC : Communication test between IC3401 and NFC P.C.B. Unit
Display other than “OK” are abnomalities of each lines.
End method of operation
# Touch the [ BAK ] of LCD to exit the power on self check result display, and the POWER OFF.

Adjustment function for the Service
Touch the [14] of LCD, select the adjustment function for the service.

Function description
The service adjustment do setup and adjustment of the following items required in the field service.
For a detailed content, such as the adjustment procedure, refer to “9 Measurements and Adjustments”.
# Model setting
# Setting of the file name for adjustment data backup to SD card
# Execution of adjustment data backup to SD card
# Checking of Switches
# Zoom Lever adjustment
# Camera adjustment (Iris, Gyro, OIS and White Missing pixels)
# Zoom/Tracking adjustment (with Zoom hysteresis adjustment), ND Focus adjustment
# ND WB GAIN adjustment
# Indoor White Balance Adjustment (SHADING, CH-GAIN, PWM, WB)
# Outdoor White Balance Adjustment (PWM, WB)
# Level shot adjustment
End method of operation
# Set the power switch to OFF to turn the unit off.

Restore the backed up adjustment data
Touch the [15] of LCD, select restoring the backed up adjustment data from SD card to the unit.

Function description
Restore the adjustment data to new or repaired Main P.C.B. from SD card that the data backed up from original Main P.C.B.
before repairs or replacement.
To backup the adjustment data, use “6.4. Adjustment function for the Service”.

End method of operation
# Set the power switch to OFF to turn the unit off

Touch Panel Calibration
Touch the [16] of LCD, select the calibration of touch panel.

Function description
Calibrate the touch positions of the touch panel.
End method of operation
# Set the power switch to OFF to turn the unit off.
NFC Initialization
Touch the [17] of LCD, select initialization of NFC (Near Field Communication) function.

Function description
This function performs the Initialization of the NFC chip and erase the settings like as Wi-Fi connection etc..
End method of operation
# Set the power switch to OFF to turn the unit off.

How to Replace the Lithium Battery
Replacement Procedure
1. Remove the SIDE R OPERATION P.C.B.. (Refer to Disassembly Procedures.)
2. Remove the Lithium battery (Ref. No. “B6951” at foil side of SIDE R OPERATION P.C.B.) and then replace it into new one.

NOTE:
This Lithium battery is a critical component.
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.