PHILIPS -32PFL6615D – 40PFL6615D – 46PFL6615D - VAN GOGH – DA VINCI – MATISSE _Q552.1L - HOW TO ENTER SERVICE MODE
SERVICE MODES
Service Default mode (SDM) and Service Alignment Mode (SAM) offers several features for the service technician, while the Customer Service Mode (CSM) is used for communication between the call center and the customer.
SDM
[DEFAULT SERVICE MODE] Purpose:
- To create a pre-defined setting, to get the same measurement results as given in this manual.
- To override SW protections detected by stand-by processor and make the TV start up to the step just before protection (a sort of automatic tepwise start-up).
- All service-unfriendly modes (if present) are disabled, like:
- (Sleep) timer.
- Child/parental lock.
- Picture mute (blue mute or black mute).
- Automatic volume levelling (AVL).
- Skip/blank of non-favorite pre-sets.
How to Activate SDM
- For this chassis there are two kinds of SDM: an analogue SDM and a digital SDM.
- Analogue SDM: use the standard RC-transmitter and key in the code “062596”, directly followed by the “MENU” (or “HOME”) button. Note: It is possible that, together with the SDM, the main menu will appear.
- To switch it “off”, push the “MENU” (or "HOME") button again.
- Digital SDM: use the standard RC-transmitter and key in the code “062593”, directly followed by the “MENU” (or "HOME") button.
- Note: It is possible that, together with the SDM, the main menu will appear.
- To switch it “off”, push the “MENU” (or "HOME") button again.
After activating this mode, “SDM” will appear in the upper
right corner of the screen (when a picture is available).
How to Navigate
- When the “MENU” (or “HOME”) button is pressed on the RC transmitter, the TV set will toggle between the SDM and the normal user menu.
- Switch the set to STAND-BY via the RC-transmitter.
- Via a standard customer RC-transmitter: key in “00”- sequence.
SDM DEFAULT SETTINGS
Region
|
Freq. (MHz)
|
Default system
|
Europe,
AP(PAL/Multi)
|
475.25
|
PAL
B/G
|
Europe,
AP DVB-T
|
546.00
PID
Video:
0B 06 PID
PCR:
0B 06 PID
Audio:
0B 07
|
DVB-T
|
- All picture settings at 50% (brightness, color, contrast).
- Sound volume at 25%.