PRIMA PS-42D8 B - PS-42D8 S - PH-42D8 - TROUBLE DIAGNOSIS - DISTRIBUTION OF CIRCUIT BOARDS & PART NUMBERS -

PRIMA PS-42D8 B - PS-42D8 S - PH-42D8 - TROUBLE DIAGNOSIS - DISTRIBUTION OF CIRCUIT BOARDS & PART NUMBERS - Universal Remote Controls Setup Codes

PLASMA SCREEN OF 'PS' & 'PH' [TROUBLE DIAGNOSIS]

The screen is not bright:

• Check to see if the power supply plug from the power filter board to the power supply board is well inserted into the socket. If not, plug it in.
• Check if the fuse on the power supply board is blown up. If yes, replace it for a good one.
• Remove our main board and the video frequency processing board, ground the pin 4 POWER_ON/OFF of socket CN802 of the power supply board, and then push the slide switch SW2001 on the logic board to the internal modes (1, 3 up and 2, 4 down) from external modes (1, 2, 4 up and 3down) Switch the power on and see if the screen is lit. If the screen can give a normal and completely white field signal, then the problem lies in our main board or video frequency processing board, which will be dealt with separately.
• If the screen is not lit, then first replace the power supply board to see if the problem is solved.
• If the problem remains after the power supply board is replaced, then the problem lies in the screen. Replace the entire screen.

There appears on the screen a line or several unlit lines.

• Check if the socket between Y driving board and Y BUFFER is plugged well. If not, plug it well. If yes then replace Y BUFFER (upper, lower) in respect to the upper , lower part of the dark line on the screen. 

There appear on the screen one or several horizontal lines that are much brighter than the remaining horizontal lines at the edge:

• Check if the socket between Y driving board and Y BUFFER is plugged well. If not, plug it well. If yes then replace Y BUFFER (upper, lower) in respect to the upper , lower part of the dark line on the screen.

There appear on the screen one vertical unlit line or a vertical entirely unlit block.

• If it’s one vertical unlit line, then COF has problem.
• If it’s a vertical entirely unlit block, then first check if the connection socket between COF and logic BUFFER has problem. If not, check if the connection socket between the logic BUFFER and the logic board is normal. If yes, replace the logic BUFFER. Finally, if the problem still remains when the replacement is over, then replace the logic board.

There appears on the screen a mono color signal and one or several vertical bright lines of other colors:

• If it’s a vertical bright line of other colors, then the problem lies with COF or the screen.
• If it’s an entire vertical block of other colors, then first check to see if the connection socket between COF and logic BUFFER has problem. If no problem, check if the connection sockets between the logic BUFFER and the logic board is normal. If it’s normal, then replace the logic BUFFER. If the problem still remains after the replacement, then replace the logic board. Finally if the problem is still there, then the problem lies with COF.

There appear on the screen abnormal bright spots or blocks that are different from what’s described above:

• Check if the connection socket between COF and logic BUFFER board has been well plugged.
• Replace the logic BUFFER board. If it’s not solved then replace logic board. If the problem still remains, then it’s the problem with COF.

CIRCUIT BOARDS LAY OUT

42SD-V3(Type: S42 SD-YB03,Code No: 335-42001-00)

42HD-V3 (Type:S42AX-XB01,Code No:335-42002-00)

SIGNAL PROCESSOR BOARDS

PARTS NAME & NUMBERS

CLICK ON PICTURES TO MAGNIFY

SET-UP CODES

GE:  1019 0165 0116 0167

RCA RCR 311W: 1139

RCA RCR 312W: 10761, 10783, 10815, 10817

RCA RCU 300XP 36:  43

RCA RCR N04GR: 10761, 11785

RCA RCR 4383: 10761, 10783, 10815, 10817

RCA RCR 311BN: 10761, 10783, 10815, 10817

AR&T UVERSE: 1113

URC 4140: 0055 0032 0287

URC 2054: 10761,10817,11785,1193