SAMSUNG CW29Z306VBXXEC - TROUBLESHOOTING BY PARTS
Tuner Diagnosis
If no signal is received even though the RF signal from the
external aerial is connected to the MAIN Board Tuner, check the following
items.
- Supply Power: 5V, 9V, 33V
- Check for an RF defect: Check the CVBS output
- Check for an AUDIO defect: Check the SiF Signal output.
It receives the EXT1/EXT2/signal and consists of monitor
output (video and audio). The signal is
input to VSP9402 through the port. If no signal input/output is detected, check
the following items.
- Power supply : VSP9402 (3.3V,1.8V) , CXA2180(5V)
- Check if the input and output jacks are defective.
CLICK ON THE PICTURES TO ZOOM
DNIe (SPD41) Diagnosis
The signal is received from the Audio Processor (MSP3421G)
and sound is output at 10W + 10W power.
Power supply :15V
- Check for input defects : L/R
- Check for output defects : L+, L-, R+, R-
Power supply : 3.3V,1.8V,9V , 5V
Check for input defects : SIF, SCL1/2-IN,SCL1/2-OUT
Check for output
defects : SOUND L/R.
VSP9402 Diagnosis
It receives RF, AV1/2/3 and S-VHS (Y,C) signals and outputs
to Y/Pb/Pr of CXA2180Q, M-OUT and V-OUT through internal switching.
- Power supply :1.8V, 3.3V
- Check for input defects : RF, SCL1/2,S-VHS(Y,C)
- Check for output defects :M-OUT,Y,Pb,Pr,HS1,VS1.
The Y/Pb/Pr signal is received from VSP9405B and CXA2151Q
and the signal is output as R/G/B. It also outputs the V/H Drive, E/W and
performs the ABL and EHT operation. If
V-Drive output is not detected, check for an IC defect..
- Power supply : 5V, 9V
- Check for input defects : Y/Pb/Pr, H/V
- Check for output defects : R/G/B, ABL, EW, V/H-DRIVE.