SAMSUNG - LN23R71BAX - LN23R71WAX - LN26R71BAX - LN32R71BAX - LN40R71BAX _ Software Upgrade Procedure
HOW TO UPGRADE FLASH ROM _ With RS232c cable
Install the Flash Down loader
Connect Set (Service Jack) and Jig Cable to execute Program
Update.
Turn on the Set (or on Stand by mode)
Run
"MTKtool"
CLICK ON PICTURES TO ZOOM
Click Reset
Choose MT8202 (1)
Select Com Port (2) (Auto Detect)
Select Bin file, by browse (3)
Click Upgrade button (4)
Turn off (= AC Power off) the Set (waiting a few seconds)
and turn on again.
HOW TO UPGRADE FLASH ROM_With UART JIG
In the usual cases, Update S/W by using RS-232C Cable.
If some problems occur under this condition, update S/W by
using UART JIG.
You can use UART JIG with USB Connection.
Install (PL-2303 Driver Installer) in your PC before using
the JIG Connect 4P Lead connector to Main Board (CN501).
Alignments and Adjustments:
Pin Assignment.
Turn on the Set (or on Stand by mode)
Run "MTKtool"
When you run "MTKtool", this Program can detect
USB port automatically
Choose USB interface and Update S/W as RS-232C case.