REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday, 5 March 2019

SONY HDR-FX1 - HDR-FX1E - HDV HD CAMCORDER – DISASSEMBLING PROCEDURE – HOW TO REMOVE THE CASSETTE MANUALLY - DIGITAL CAMERA REPAIRING AND SERVICE

 SONY HDR-FX1 - HDR-FX1E - HDV HD CAMCORDER – DISASSEMBLING PROCEDURE – HOW TO REMOVE THE CASSETTE MANUALLY - DIGITAL CAMERA REPAIRING AND SERVICE

Category: Digital Camera Repair and Service 

Contents of this article 

  • How to take out the cassette 
  • Disassembling procedure 

SONY HDR-FX1 - HDR-FX1E 

POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate.
This following two methods are available to prevent this. Take note of which to use during repairs.
Method 1.
Use the AC power adaptor (AC-L15, AC-VQ800 etc.).
Method 2.
Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.
TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1 Remove the power supply (Battery and AC power adaptor).
2 Open the cassette lid.
3 Remove the MD lid.
4 Supply +4.5V between the LM UNLOAD terminal and the LM LOAD terminal from the DC power supply and unload the cassete.

SELF-DIAGNOSIS FUNCTION
SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis function starts working, and displays on the viewfinder, or LCD screen what to do.
SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of the viewfinder or LCD screen consists of an alphabet and 4-digit number, which blinks at 3.2Hz. This 5-character display indicates the “repaired by:”, “block” in which the problem occurred, and “detailed code” of the problem.
DISASSEBLING
1 Open the grip belt.
2 Remove the grip belt in the direction of the arrow a.
3 Remove the grip belt in the direction of the arrow b

1 Slide the knob to unlock.
2 Remove the VF rear cabinet assembly in the direction of the arrow a.

1. Turn over the EVF section in the direction of the arrow.
2. Two screws (M2x4) black
3. Remove the handle cabinet
4. FP-980 flexible board (40P)
5. Screw (M2x6) black
6. Push
7. Handle cabinet (Front)
8. FP-981 flexible board (40P)

1. Four bolts (M2.6x5) black
2. Handle section

1. Open the grip belt.
2. Remove the grip belt in the direction of the arrow a.
3. Three screws (M2x4) black
4. Three screws (M2x4) black
5. Two screws (M2x4) black
6. Control switch block (PS5610) (18P)
7. Remove the cabinet (L) section in the direction of the arrow b.

1. Open the cassette lid assembly.
2. Screw (M2x4) black
3. Close the cassette lid assembly.
4. Four screws (M2x4) black
5. Three screws (M2x4) black
6. FP-972 flexible board (32P)
7. Remove the cabinet (R) section in the direction of the arrow a.

1. FP-981 flexible board (39P)
2. Screw (M2x4) black
3. Holder (CCD connector)
4. FP-975 flexible board (39P)
5. FP-964 flexible board (10P)
6. FP-972 flexible board (33P)
7. From lens flexible (10P)
8. From JK-274 board (10P)
9. From JK-274 board (22P)
10. From lens flexible (27P)
11. From lens flexible (51P)

1. Peel off the sheet (EMI DC harness) sheet .
2. FP-959 flexible board (6P)
3. DC-IN connector (3P)
4. Battery terminal board (4P)

1. Four screws (M2x3) silver
2. FP-974 flexible board (30P)
3. FP-974 flexible board (22P)
4. FP-985 flexible board (28P)
5. Four screws (M2x3) silver
6. MR-048 board
7. Mechanism deck, MD chassis assembly

1. Four screws (M2x3) silver
2. Cassette lid assembly

1. Screw (M2x5) silver
2. Four screws (M2x3) silver
3. Two screws (M2x3) silver
4. From CD-522 board (100P)
5. FP-974 flexible board
6. VC-367 board, VA-119 board, Heat sink (VC) assembly, etc

1. Screw (M2x5) silver
2. Three screws (M2x5) silver
3. Two screws (M2x5) silver
4. FP-972 flexible board
5. Cabinet (R (Lens)) assembly, Protection cushion (FP)
6. Four screws (M2x5) silver
7. Lens section

1. Open the LCD section in the direction of the arrow.
2. Four screws (M2x4) black
3. Control switch block (ZS-5610) (6p)
4. Handle cabinet (Upper) assembly, Control switch block (ZS-5610)

1. Four tipping screws (M2x5) black
2. Flexible flat cable (FDM-009) (10P)
3. Handle panel cabinet assembly, FK-090 board, etc.


1. Peel off the harness fixed tape.
2. FP-984 flexible board (33P)
3. Four screws (M2x3) silver
4. EVF section

1. Close the LCD section in the direction of the arrow.
2. Two screws (M2x4) black
3. Hinge cover (Lower)

1. Open the LCD section in the direction of the arrow a.
2. Peel off the protection sheet (FP-967).
3. Two screws (M2x4) black
4. FP-967 board (6P)
5. Screw (M2x4) black
6. Harness (SW-116) (2P)
7. Harness (PD-226) (12P)
8. Harness (PD-226) (10P)
9. Harness guide. etc.
Posted By: FRANK at 05:57
TAG: , ,