REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday 5 March 2019

SONY KLV-32R306 - HOW TO ENTER SERVICE MODE - HOW TO ACTIVATE SELF DIAGNOSTICS - UPDATING SOFTWARE - LED TV REPAIR AND SERVICE

SONY KLV-32R306 - How to enter SERVICE mode - How to activate self diagnostics - Updating software - LED TV repair and service

Category: LED Television Repair and Service 

Contents ts of this article 

  • How to access service mode 
  • Accessing Diagnostic Menu
  • Model number edit 
  • Software update

SONY KLV-32R306

Accessing Service Mode
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “Volume +” then “TV power” on remote.
3) You can see Service Mode on display.
Accessing Software Version
1) Press (Enter) or RIGHT button on Remote to enter status information.
2) Press (Enter) button on Remote to back to Service Mode.
Accessing Self Diagnostic History
1) Press (Enter) button on Remote to enter Self Check Mode.
2) Press Enter button on Remote to back to Service Mode
Accessing Self Diagnostic Menu
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “Volume -” then “TV power” on remote.
3) T Exit press power Off & on.
Remote function:
Error history clear : <8> -> <0>
Panel operation time clear: <7> -> <0>
Accessing Serial Number Edit
1) Press  RIGHT button on Remote to edit Serial Number.
2) Press UP or DOWN  button to select number
The font color of YES is change to black when it is selected.
3) Serial Number can be set ONLY ONCE.
After user input data , press <Enter>.
Pop dialog will appear to inform user to confirm data.
Press LEFT or RIGHT button to select YES or NO.
Select YES if input data is correct
Select NO if input data is incorrect.
Press <Enter> to save answer.
4) If yes selected then the input data will save to the EEPROM
SERIAL NUMBER EDIT is grayed out and the serial number that has been input is displayed.
User will not able to edit anymore
5) If NO is selected, the input data is not saved into EEPROM
The serial number that has been input is displayed.
User can still edit the Serial Number.
Note : * The font color of NO is change to black when it is selected
Note : * The font color of SERIAL NUMBER is white after NO is selected
Accessing Model Name Edit
1) Press RIGHT button on Remote to edit Model Name.
2) Press UP or DOWN  button on Remote to select character
3) Model Name can be set ONLY ONCE.
After user input data , press <Enter>.
Pop dialog will appear to inform user to confirm data.
Press LEFT or RIGHT button to select YES or NO.
Select YES if input data is correct.
Select NO if input data is incorrect.
Press <Enter> to save answer.
4) If YES is selected, the input data is saved into EEPROM.
Model Name EDIT is grayed out and the model name that has been input is displayed
User will not able to edit anymore
Updating the software (For Asia Region Only)
Note:
Software updates can be performed by:
1)System Update through the Internet which available only on Certain LCD models. Please check on i-manual or Operating Instruction whether the model is available with the system.
OR
2) Please check with Software Upgrade Manual in Service Website for the procedure and when it is require for the software updating.
3) The software updates may not be ready yet in the Website after the 1st Issue of Service Manual is released.
4) Do check and keep updated with the Service Website for any information and/or listed issues that are software related to avoid any discrepancy.
No Power
Check DC voltage at JL6001 Is it 19.5V?
Take out adaptor and test at adaptor output is it 19V – 19.5V? > BB board
If adapter is faulty Change adaptor and test again.
MOTHER BOARD  
CLICK ON THE IMAGE TO ZOOM IN
Posted By: FRANK at 01:43
TAG: , , ,