
SONY LED
Model: KDL-24EX320
Chassis / Version: AZ2W
Panel: T240HW01 V.0
LED backlight: Edge LED
T-CON: T240HW01 V0 CTRL BD
LED driver (backlight): integrated into PSU
Power Supply (PSU): PSC10343E M
PWM Power: SSC1D310, SI-8205NHD
MOSFET Power: STP10NK80ZFP
MainBoard: 1-884-135-11 SOWXG 22_ATR_MB 48.72U01.021
IC MainBoard: CXD4727GB, SIL9287BCNU, GL850G, H5TQ2G63BFR, TPS54425
Technical Specifications KDL-24EX320
SONY KDL-24EX320
General repair guidelines for TV LCD LED
Possible malfunctions
- The SONY KDL-24EX320 TV does not turn on, does not respond to the remote control and buttons on the control panel, does not light up or blink indicators.
Most likely in this case, the main switching power supply (IIPS) PSC10343E is faulty. It is necessary to measure its output voltages and, if they are absent, check the serviceability of power switches (STP10NK80ZFP) and rectifier diodes in the converters for possible breakdown.
In case of breakdowns of diodes in the secondary circuits, the converter can operate in emergency short circuit mode without output voltages, and during short circuit in the power elements of the primary circuit, the mains fuse and / or current sensor at the source of the key usually breaks.
The breakdown of Mos-Fet keys used in pulsed sources is often caused by malfunctions of other elements, for example, in the power supply circuit of a PWM controller, in frequency-setting or damping circuits, as well as in Negative Stabilization Feedback. PWM chips SSC1D310, SI-8205NHD are usually checked by replacing with new, or obviously working.
- There is no image, the screen is black, there is sound, with external illumination of the screen, you can sometimes see faint outlines of the image.
In some of these cases, the malfunction is caused by a lack of backlighting on the display. The reason can be found in the malfunction of the LEDs, in the violation of the contact connections of the LED strips, or in the provision of their power (LED driver).
When trying to detect a break in the LED lines, it should be taken into account that it is difficult to do this without disassembling the panel. For example, a current source is needed to open PN junctions connected in series.
- The TV does not turn on, does not respond to the remote control. The indicator blinks or signals standby mode.
Repair or diagnostics of the 1-884-135-11 motherboard should begin by checking the stabilizers and power converters needed to power the microcircuit and matrix. If necessary, update or replace the software (software). When repairing an MB board, you need to check its components CXD4727GB, SIL9287BCNU, GL850G, H5TQ2G63BFR, TPS54425. Defective items should be replaced. If chips with BGA soldering technology are used, a problem in its implementation is detected by the local heating of the chip.
Owners and users of the SONY KDL-24EX320 TV should remember that self-repair without special knowledge, skills and qualifications can be fraught with negative consequences that can lead to complete non-repairability of the device!
Schematic / Service manual -----------> SONY KDL-22EX320 , KDL-22EX325, KDL-24EX320, KDL-24EX325, KDL-26EX320, KDL-26EX321, KDL-26EX325, KDL-32EX421, KDL-32EX425, KDL-32EX523, KDL-32EX524, KDL-32EX525, KDL-37EX521, KDL-37EX524, KDL-37EX525, KDL-40EX520, KDL-40EX521, KDL-40EX523, KDL-40EX524, KDL-40EX525, KDL-46EX520, KDL-46EX521, KDL-46EX524, KDL-46EX525 Chassis AZ2W

1-884-135-11
The appearance of the power supply
Main features of the device SONY KDL-24EX320:
Installed matrix (LED-panel) T240HW01 V.0.
The matrix control uses the Timing Controller (T-CON) T240HW01.
To power the backlight LEDs, a converter is used, combined with a power supply.
The necessary supply voltages for all nodes of the SONY KDL-24EX320 TV are generated by the PSC10343E power module or its analogs using SSC1D310, SI-8205NHD microcircuits and power switches of the STP10NK80ZFP type.
MainBoard - the main board (motherboard) is a module 1-884-135-11, using microchips CXD4727GB, SIL9287BCNU, GL850G, H5TQ2G63BFR, TPS54425 and others.