- Active Soundbar with wireless subwoofer - Schematics
harman/kardon SB 30/230 Multichannel active soundbar speaker system – Circuit Diagram
SB
30 CNTR Soundbar
Amplifier
power: 40 watts x 4; 10 watts x 7
High-frequency
transducers: Seven x 1" (25mm) domes
Low-frequency
transducers: Six x 2" (51mm) cones
SB
30 Subwoofer
Amplifier
power: 100 watts
Frequency
response: 40Hz – 160Hz
Low-frequency
transducer: 8" (200mm) down-firing cone.
An 8-inch (200mm), 100-watt wireless powered subwoofer (the SB 30 SUB).
An IR remote control.
Wall-mount brackets for the soundbar.
An optical digital audio cable for connecting the system directly to your cable/ satellite tuner or disc player.
A 6-1/2-foot (2m) stereo audio cable for connecting the system directly to your TV’s audio output.
A 3-foot (1.8m) AC power cord for the SB 30 CNTR soundbar.
An IR remote control.
Wall-mount brackets for the soundbar.
An optical digital audio cable for connecting the system directly to your cable/ satellite tuner or disc player.
A 6-1/2-foot (2m) stereo audio cable for connecting the system directly to your TV’s audio output.
A 3-foot (1.8m) AC power cord for the SB 30 CNTR soundbar.
Circuit Diagram (Schematic) [Click on the schematics to zoom in]
The SB 30
CNTR soundbar contains six 2-inch woofers and seven 1-inch tweeters,
powered by four 40-watt amplifiers and seven 10-watt amplifiers. It
features a powerful triple-core DSP (digital signal processor) with two
HARMAN-exclusive surround modes (Virtual and HARMAN Wave – patent
pending) that utilize different combinations of the soundbar’s 13
transducers and 11 amplifier channels to create an astonishingly
realistic surround-sound experience in any size room and for listeners
at any position in the room, without needing any extra speakers or
wires.
You can
set the soundbar on a table in front of your TV, or, if you have a
wall-mounted flat-panel TV, you can use the supplied brackets to mount
the soundbar on the wall along with your flat-panel TV.
The SB 30
SUB subwoofer receives its signal from the SB 30 CNTR soundbar via
wireless technology, so you can place it anywhere in your room without
having to run any wires between it and the soundbar. Its 8-inch (200mm)
woofer and built-in 100-watt amplifier deliver the impact and excitement
from your favorite movies and video games. Other conveniences include a
volume control, a phase switch for fine-tuning bass performance to suit
your listening environment, and an efficient switching system that
senses the presence of an audio signal and automatically switches the
subwoofer on.
Sidney
Harman and Bernard Kardon invented the high-fidelity receiver more than
50 years ago. With state-of-the-art features and time-honored circuit
designs, the SB 30 system will turn your flat-panel TV into a fun and
exciting home theater.
Wireless Code Switches
In the
unlikely event that you encounter interference when operating the
system, or if you have more than one SB 30 system in operation, you may
change the channel at which the wireless system operates. There are
four-position Wireless Code switches on both the soundbar and subwoofer.
To change the wireless channel, set each of the switches to one of the
other three positions.
IMPORTANT: The switches on the soundbar and the subwoofer must be set to the same position for the wireless system to work.