PHILIPS HTS3371-98 – Philips HTS3378-98-93 – HOW TO CHANGE THE REGION CODE – SOFTWARE UPDATE – CIRCUIT DIAGRAM
System
Reset – Password change – Software update – Region code change – SMPS and Power
Amplifier Circuit Diagram - Philips Home Theater System - HTS3378
Total
output power: Home Theater Mode 1000W
RMS [6 X 167]
SYSTEM RESET
> Press
Setup button on the remote control. The
TV will show the set-up menu.
> Select
the menu using Dn and Right buttons on the remote control.
> Go
to preference page to do the system reset.
REGION CODE CHANGE
> In
open mode, press 9,9,9,9 on the remote control and then input the desired
number to change the region code.
1
> USA
2
> EU
3
> AP
4
> AUSTRALIA, NZ, LATAM
5
> RUSSIA, INDIA
6
> CHINA
VERSION CHANGE
> In
open mode, press 1,5,9 on the remote control
> Press
OK button to confirm.
TV
will show the message:
PASSWORD CHANGE
> Press
the Setup button on the remote control.
The TV will show the set-up menu.
> Select
the menu, using the Dn and Right buttons on the remote control.
> Go
preference page and select Password to change. “0 0 0 0 0 0” is the default
password.
Check
the software version
> Open
the CD door.
> Press
the Info button on the remote control.
> TV
will show the version on screen.
TRADE MODEL
Press
the open/close button on the remote control.
Press
2,5,9 on the remote control. VFD will
display TRA ON or TRA OFF.
SOFTWARE UPGRADE
> Copy
software files into a CD-R.
> Open
the CD door, and then insert the CD-R program disc.
> Close
the CD door.
VFD
will show
Loading
Erase
Writing
Done
The
system will switch off and on again automatically.
Will
display
Upgrade
file detected. Do you wish to continue
with the software upgrade?
> Select
OK
The
OSD will show:
Upgrade
in progress. V337X. Please do not unplug
of switch OFF the device.
SMPS AND POWER AMPLIFIER SCHEMATIC
CLICK ON THE PICTURES TO ZOOM IN
