SANYO LCD-32CA9 - LCD-37CA9 - LCD-42CA9 SERVICE MODE AND POWER SUPPLY CIRCUIT
SANYO LCD-32CA9 - LCD-37CA9 - LCD-42CA9
SERVICE MODE AND POWER SUPPLY CIRCUIT
On-screen Service Menu System
How to enter the Service Menu
1. Press MENU button on SIDE controls, MENU will display.
2. Press and hold MENU button on SIDE controls and press “1” button on remote controls. SERVICE MENU will display.
How to enter the Service Menu
1. Press MENU button on SIDE controls, MENU will display.
2. Press and hold MENU button on SIDE controls and press “1” button on remote controls. SERVICE MENU will display.
How to select the service section
and service item and change data value:
To select Service Section: Press the Cursor UP or DOWN button on the remote control hand set, and press the OK button to enter the Sub menu.
To select Service Section: Press the Cursor UP or DOWN button on the remote control hand set, and press the OK button to enter the Sub menu.
To change data value: Select service item by pressing the Cursor UP or DOWB and change data value by pressing the Cursor
LEFT or RIGHT button.
Exit from the service menu
Press the MENU button repeatedly or turn off the TV set by pressing the POWER ON/OFF button.
Press the MENU button repeatedly or turn off the TV set by pressing the POWER ON/OFF button.
White Balance Adjustment
1.Input a white
pattern (80%)to the composite input terminal.
2.set the TV to
following codition
Picture mode :
standard
Color temperature:
normal
Pre heading time :
more than 10 minutes
3.Eneter the service
mode and select the white balance with UP/DOWN arroe key . press LEFT/RIGHT key
to enter the white balance adjustment ,press corresponding number to adjust RGB
4.After adjustment ,confirm
white balance again by normal.
POWER SUPPLY CIRCUIT
CLICK ON THE IMAGE TO ZOOM IN