REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 1 March 2019

SKYWORTH AND ERISSON 32LS16 LCD TV – SERVICE MODE AND ADJUSTMENTS

Skyworth and Erisson 32LS16 LCD TV – Service Mode and adjustments


Erisson 32LS16 - Skyworth 32LS16 LCD TV - How to enter service mode (Factory mode ) - service adjustments
To enter the factory mode (Service Mode)
Press the menu” key on the remote control unit, move to SOUND submenu, choose Balance (the character Balance” turn pink), press the number keys 9883 in turn.
The factory main menu
Service Mode
Language Option 1
Language Option 2
Hotel Option
Deviation Settings
DRX
NVM Edit
Initialize NVM from ROM
MinMidMax Init
Scaler

Use PROG+/PROE- to choose the options, the option which has been choose display red.
After choosing the option, press VOL+ to enter the option, then you can set different parameter.
System option
Option PAL < Yes >
Option NTSC < Yes >
Option SECAM < Yes >
Option BG < Yes >
Option DK < Yes >
Option I < Yes >
Option M/N < Yes >
Option L < Yes >
Option LL < Yes >
Option Naming < Yes >
Option APS < Yes >
Powerup ATS < Yes >
The options in system mainly contain the switch of some color and sound sys, set “yes” or “no” with the VOL+ key. Option Naming can be used to switch the naming of saving programs in APS, Option APS can switch the function of search and compositor in the searching state. Power up ATS can switch the Factory
Reset in the FUNCTION MENU. The word in the < > at the right side of options shows the current option state, <yes> means “on” and <no>  means” off”.
The default state is <yes>.
IC Option
Option HDMI < Yes >
Option HDCP < Yes >
Option DVI and HDMI < Yes >
When Option HDMI displays “yes”, HDMI is open and DVI is off ,when it displays “no”, the action is opposite. Option HDCP means to turn HDCP on/off (Highbandwidth Digital-Content Protection). The third item shows to turn on/off the interface of Hi-Fi digital.
Teletext Option:
Teletext On/Off < Yes >
Teletext Language < UK >
All of the default states is “yes”
The first item shows the on/off state of Teletext function, the second item, the choice of language, available languages for selecting: UK, East Eu, Greece, Cyrilli, Arabic.
AV Option
Option SCART1 < Yes >
Option SCART2 < Yes >
Option AV < Yes >
Option SV < Yes >
Option DVD < Off >
Option SCART Output < TV >
The items 1~4 can be set to “ yes” or“ no which show the switches of ” SCART1, SCART2, AV, S-VIDEO. There are three states can be set in Option DVD, they are Off, DVD and DTV, they show off, turn on DVD and turn on DTV. Option SCART Output can be set to AV or TV, they show SCART output signal or AV signal. The default setting is the same as the state above.
Language Option1 & Language Option2
The two options are menu language setting, each of them has “yes” and “no” state. You can set Menu language in FUNCTION MENU when the language is set to “yes”. English is only set in the default setting, others are off.
Hotel Option
Search Menu Display < Yes >
Blue Screen < Yes >
Option Reset < Yes >
Fixed Volume < No >
Max Volume < +100 >
Local Key Operation < Yes >
Power On Program < REM >
Power On Source < TV >
Power On Status < REM >
Logo Edit
APS As Philips < Yes >
Search Menu Display shows turn on/off the search menu. The volume will stop at the prior setting and can’t be changed by pressing VOL+ or VOL- when the Fixed Volume is set to “yes”. Local Key Operation shows whether the key-board is in effect Power On Program can be set to REM,+1~+200, corresponds to channel 1~200 in under memory state. Power On Source is the setting of boot-strap input fountain, TV and AV. There are REM, On and Off three settings under Power On Status, they show
Press VOL+, enter Logo Edit, two options:
Logo Edit __________
LogoFontSize  < + 2 >
LogoOnOff  < Yes >
The first item can edit the menu in turning on te set , you can use two number keys under Logo Font Size menu to input twenty-six letters and Space, you can edit ten letters at most. Use Logo Font Size to set the size of Logo, There are+1, +2, +3,+4 available. 
Logo On Off shows the switch of Logo.
APS As : according to the standard of Philips.
The default value is the same as the state above.
Deviation Settings
M Japan < ＋24 >
BTSC < ＋24 >
DK Dual < ＋24 >
BG < ＋24 >
NICAM L < ＋10 >
NICAM I < ＋24 >
DK NICAM < ＋24 >
FM Radio < ＋24 >
DRXStandard Select < B >
TOP Setting < ＋8 >
Video Peaking < —1 >
SIF Reference < ＋2 >
Subcarrier adjustment < ＋20 >
NVM Edit
NVM－edit addr. (hex) _ _ _
NVM－edit data (hex) _ _
Write Choose the edit address in NVM-edit addr, the value will display in the data item Simultaneously, use VOL+ and VOL- to change the values, use VOL+ to write the address In the White item.
Initialize NVM from ROM
Initialize EEPROM, press VOL+ to enter the option, Initialize NVM from ROM menu will show the clew, press VOL+ to go on and press it again to initialize EEPROM.
MinMidMax InVolume0 < －99 >
Volume1 < －85 >
Volume10 < －45 >
Volume25 < －25 >
Volume50 < －10 >
Volume75 < －3 >
Volume100 < ＋2 >
Set sound curve in the option, the default setting is the same as the state above.
Scaler
ADC Rgain < ＋128 >
ADC Ggain < ＋128 >
ADC Bgain < ＋128 >
ADC Roffset < ＋128 >
ADC Goffset < ＋128 >
ADC Boffset < ＋128 >
Rgain < ＋128 >
Ggain < ＋128 >
Bgain < ＋128 >
Roffset < ＋128 >
Goffset < ＋128 >
Boffset < ＋128 >
After setting the parameters, press MENU to save the setting and exit from the factory submenu.
Posted By: FRANK at 07:01
TAG: , ,