REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Monday 11 March 2019

SONY HT-CT770 HOME THEATER SOUND BAR SERVICE MODE ADJUSTMENTS AND POWER SUPPLY CIRCUIT

SONY HT-CT770 HOME THEATER SOUND BAR SERVICE MODE ADJUSTMENTS AND POWER SUPPLY CIRCUIT


SONY HT-CT770

 HOME THEATER SOUND BAR 

SERVICE MODE ADJUSTMENTS AND POWER SUPPLY CIRCUIT 


TEST MODES OTHER THAN THE TEST MODE MENU
These are executable test mode even if not entering the test mode menu.
Cold Reset
It can initialize various backup information.
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press the [POWER] button for ten seconds.
3. The message “RESET” is displayed on the fluorescent indicator tube, then turn the power off.
TEST MODES IN THE TEST MODE MENU
These are the test modes done in the test mode menu.
Setting method of the test mode menu:
1. Press the [POWER] button to turn the power on.
2. Press the two buttons of the [INPUT] and [VOL +] simultaneously for five seconds.
3. The message “PANEL” blinks on the fluorescent indicator tube and enter the test mode menu.
Releasing method of the test mode menu:
Press the [POWER] button to release the test mode menu.
Panel Test Mode
It can confirm the lighting of fluorescent indicator tube and LEDs,
operation of buttons, display of model name, destination and software version.
Procedure:
1. Enter the test mode menu.
2. In the state of blinking the “PANEL” on the fluorescent indicator tube, press the [INPUT] button.
3. All segments in the fluorescent indicator tube and all LEDs are lighted up.
4. When pressing the [VOL +] button, the display on the fluorescent indicator tube repeatedly changes in order from all lighting > pattern 1 (lamp LED (white color) is lighted up) > pattern 2 (lamp LED (blue color) are lighted up).
5. In the state of step 4, press the [VOL –] button and “K 0” is displayed on the fluorescent indicator tube.
Each time a button is pressed, “K 0” value increases. However, once a button is pressed, it is no longer taken into account. When pressing the all buttons, “OK” and “K 5” are alternately displayed on the fluorescent indicator tube.
6. In the state of step 4, press the [INPUT] button and model name “CT770” is displayed on the fluorescent indicator tube.
Each time the [VOL +] button is pressed, the display changes from destination > MC (m-com) version > SY (system) version > UI version > TA (AMP) version > DS (DSP) version > BT (Bluetooth) version > NF (NFC) version > HD (HDMI) version, > CE (CEC) version > PF (platform) version > WS (wireless sound) version in this order, and returns to the model name display.
7. When [INPUT] button is pressed while the each version is displayed on the fluorescent indicator tube, year, month and day of the software creation is displayed on the fluorescent indicator tube.
When [INPUT] button is pressed again, the display returns to the each version display.
Releasing method:
Press the [POWER] button to release the test mode menu. (When the “K 0” to “K 4” is displayed on the fluorescent indicator tube, press the [POWER] button on the remote commander to release the test mode menu)
Model Name Display Mode
It can display the model name.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the model name “CT770”.
Destination Display Mode
It can display the destination.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the destination.
MC Version Display Mode
It can display the MC (m-com) version.
Procedure:
1. Enter the test menu.
2. Press the [VOL +]/[VOL –] buttons to select the “MC.X.XXX” (X.XXX: MC (m-com) version).
Serial Flash Version Display Mode
It can display the SF (serial flash) version.
Procedure:
1. Enter the test menu.
2. Press the [VOL +]/[VOL –] buttons to select the “SF.X.XXX” (X.XXX: SF (serial flash) version).
DSP Sound Number Display Mode
It can display the SN (DSP sound number) number.
Procedure:
1. Enter the test menu.
2. Press the [VOL +]/[VOL –] buttons to select the “SN XXX” (XXX: DSP sound number (000 to 998)).
Note: “SN ---” is displayed when the information of serial flash is not able
to be acquired.
BT Module F/W Version Display Mode
It can display the BT (Bluetooth) module firmware varsion.
Procedure:
1. Enter the test menu.
2. Press the [VOL +]/[VOL –] buttons to select the “BTM.X.XX” (X.XX: BT (Bluetooth) module firmware version).
AMP Test Mode
(It is displayed “AMP” on the fluorescent indicator tube) Not used for the servicing. Press the [POWER] button if having entered this mode.
Tone Test Mode
It can confirm the test tone output from each speaker.
Preparation:
Connect the Bar Speaker (SA-CT770) and the Subwoofer (SAWCT770) by wireless.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the “T TONE”, press the [INPUT] button.
3. The message “TONE.ON” is displayed on the fluorescent indicator tube momentarily and enter the tone test mode.
4. The output speaker is displayed on the fluorescent indicator tube. At the same time, test tone is output from speaker. (The output speaker repeatedly changes automatically in following order)
Output speaker     Display
Front L-ch  …………FL
Front R-ch …………FR
Subwoofer …………SW
Releasing method:
Press the [POWER] button to release the test mode menu.
Speaker Test Mode
(It is displayed “SPK.TST” on the fluorescent indicator tube)
 Not used for the servicing.
Press the [POWER] button if having entered this mode.
VACS Display Mode
(It is displayed “V. DISP” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
VACS ON/OFF Mode
(It is displayed “V.ONOFF” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
DSP Halt Mode
(It is displayed “DSP.HLT” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
DSP Serial Flash Update Mode
(It is displayed “SF UPD” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
User Update Mode
(It is displayed “UPDATE” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
HDCP Key Read Mode
(It is displayed “HDCP” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
NFC Test Mode
(It is displayed “NFC.TST” on the fluorescent indicator tube)
Not used for the servicing.
Press the [POWER] button if having entered this mode.
Auto Standby Test Mode
It can change the auto standby time for 3 minutes or 20 minute.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the “T. STBY”, press the [INPUT] button on the main unit.
3. The message “20 MIN” or “3 MIN”is displayed on the fluorescent indicator tube, press the [VOL +]/[VOL –] buttons to change the auto standby time.
Releasing method:
Press the [POWER] button to release the test mode menu.
Wireless Sound Test Mode
It can display the m-com version of Subwoofer (SA-WCT770).
Note :More than one item may be displayed on the fluorescent indicator tube, but it is not used for the servicing other than “VER.CHE”.
Preparation:
• Prepare the remote commander attached to this unit.
Remote commander:
RM-ANP114 (US and Canadian models)
RM-ANP115 (Except US and Canadian models)
• Connect the Bar Speaker (SA-CT770) and the Subwoofer (SAWCT770) by wireless.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the “WS TST”, press the [INPUT] button.
3. The message “FACTRY” is displayed on the fluorescent indicator tube and enter the wireless sound test mode.
4. Press the [UP/DOWN] buttons on the remote commander, select the “VER.CHE”, and press the [ENTER ] button on the remote commander.
5. The m-com version of Subwoofer (SA-WCT770) is displayed on the fluorescent indicator tube.
6. When [UP /DOWN] buttons on the remote commander is pressed while the m-com version of Subwoofer (SA-WCT770) is displayed on the fluorescent indicator tube, year, month and day of the creation is displayed on the fluorescent indicator tube.
When [UP/DOWN] buttons on the remote commander is pressed again, the display returns to the m-com version of Subwoofer (SA-WCT770) display.
Releasing method:
Press the [POWER] button to release the test mode menu.
Wireless Sound Cold Reset
It can initialize various backup information of Subwoofer (SAWCT770).
Preparation:
Connect the Bar Speaker (SA-CT770) and the Subwoofer (SAWCT770) by wireless.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the “WS RST”, press the [INPUT] button.
3. The power indicator LED on the Subwoofer (SA-WCT770) turns red and flashes, then turns on amber.
4. Pull out the power cord on the Subwoofer (SA-WCT770) from
an outlet and insert the power cord again.
Cold Reset
It can initialize various backup information.
Procedure:
1. Enter the test mode menu.
2. Press the [VOL +]/[VOL –] buttons to select the “RESET”, press the [INPUT] button.
3. The message “RESET” is displayed on the fluorescent indicator tube, then turn the power off.
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN
Posted By: FRANK at 01:48
TAG: , , , ,