REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Monday 11 March 2019

SONY KDL-40V2500 - KDL-46V25L1 SERVICE MODE , LED BLINKING AND POWER SUPPLY CIRCUIT

SONY KDL-40V2500 - KDL-46V25L1 SERVICE MODE , LED BLINKING AND POWER SUPPLY CIRCUIT


SONY KDL-40V2500 - KDL-46V25L1 

SERVICE MODE  LED BLINKING AND POWER SUPPLY CIRCUIT


Diagnostic Test Indicators
When an error occurs, the POWER LED will fl ash a set number of times to indicate the possible cause of the problem. If there is more than one error, the LED will identify the fi rst of the problem areas. If the errors occur simultaneously, the one that corresponds to the fewest fl ashes is identifi ed fi rst. Results for all of the following diagnostic items are displayed on screen. No error has occurred if the screen displays a “0”.
NUMBER OF BLINKS
MONITORING ITEM
1
Abnormal AU power voltage
2
Abnormal D5V/D9V Power voltage
3
Abnormal Panel Voltage
4
Back light failure
5
Abnormal main power voltage
6
Abnormal speaker voltage
7
Internal temperature rise
8
Ic5000

ACCESSING SERVICE ADJUSTMENTS
To adjust various set features, use the Remote Commander to put the set into service mode to display the service menus. The Remote Commander displays the service menu associated with the Digital or Analog format depending on which format is on the TV when you enter service mode.
ACCESSING THE DIGITAL SERVICE
ADJUSTMENT MENUS
1. Turn the TV on and view a Digital channel.
2. Put the TV in standby mode. (Power off).
3. Press the following buttons on the Remote Commander within a second:
DISPLAY ---- Channel 5 --- Volume + ----- POWER On.
4. Use the DOWN button to view the next category listing the white balance adjustment items
5. Use the UP or DOWN button to select the item you want to adjust.
a. To increase the data value of the category, press the RIGHT button.
b. To decrease the data value of the category, press the LEFT button.
6. To save the data value changes, press the DOWN button to select Color Save and then press the ENTER  button.
a. To save the data value changes, select Save by pressing the DOWN  button and then press the ENTER  button.
b. To cancel the data value changes, select Cancel by pressing the UP button and then pressing the ENTER  button.
VIEWING THE DIGITAL MODULE BOX
(Q-BOX) SERVICE ITEMS
Use the following instructions to display the Digital menu items you want to adjust.
1. Turn the TV on and view a Digital channel.
2. Put the TV in standby mode. (Power off).
3. Press the following buttons on the Remote Commander within a second:
DISPLAY --- Channel 5----  Volume + ----- POWER On
4. To display the Digital Module (Q Box) service adjustment menus, press JUMP .
5. To change the category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the service menu displayed. To return to the Digital Service Menu, press the JUMP button.
6. To change the adjustment item, press 1 or 4 on the Remote Commander.
7. To change the data value, press 3 or 6 on the Remote Commander.
Note: To go back to the last saved data value, press 0 then ENTER
on the Remote Commander to read the memory.
8. To write into memory, press MUTING then ENT on the Remote Commander.
9. To exit service mode, turn the power off.
ACCESSING THE ANALOG SERVICE
ADJUSTMENT MENUS
1. Turn the TV on and view an Analog channel.
2. Put the TV in standby mode. (Power off).
3. Press the following buttons on the Remote Commander within a second:
DISPLAY --- Channel 5----  Volume + ----- POWER On
4. Use the DOWN  button to view the next category listing the white balance adjustment items.
5. Use the UP or DOWN button to select the item you want to adjust.
a. To increase the data value of the category, press the RIGHT button.
b. To decrease the data value of the category, press the LEFT button.
6. To save the data value changes, press the DOWN button to select Color Save and then press the ENTER  button.
a. To save the data value changes, select Save by pressing the DOWN  button and then press the ENTER  button.
b. To cancel the data value changes, select Cancel by pressing the UP button and then pressing the ENTER  button.
RESETTING THE USER MENU – FACTORY RESET
The TEST RESET option resets all the customer adjustable data back to the factory defaults.
1. Put the TV in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second:
DISPLAY --- Channel 5----  Volume + ----- POWER On
3. Use the DOWN button to view the next category listing the white balance adjustment items.
4. Continue pressing the DOWN button until the next category list displays.
5. Press the ENTER button to select TEST RESET options.
6. Press the DOWN button to select OK.
7. Press the ENTER
WHITE BALANCE ADJUSTMENT.
The White Balance only needs to be adjusted when you replace the BU Board.
1. Through the Video 1 input, step Gray Scale with Setup.
2. Press MENU on the Remote Commander. The User Menu displays.
3. Press the DOWN  button until Settings is selected, then press the ENTER button.
4. From the Picture menu, press the RIGHT button to display the picture mode options.
a. Press the DOWN button to select Custom, then press the ENTER button.
5. From the Picture menu, press the DOWN button to select Color Temperature.
a. Press the RIGHT button to display the Color Temperature options.
b. Press the DOWN  button to select Cool, then press the ENTER button.
6. From the Picture menu, press the DOWN  button to select Advanced Settings.
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN
Posted By: FRANK at 04:48
TAG: , , ,