REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Thursday, 21 March 2019

VERIZON FIOS - REMOTE CONTROL - SETUP PROCEEDINGS - CODE SEARCH METHOD

VERIZON FIOS - REMOTE CONTROL - SETUP PROCEEDINGS - CODE SEARCH METHOD



PROGRAMMING PROCEDURE

  1. Look up your TV’s brand in the TV code list.
  2. Circle the first 4-digit number displayed for your brand of TV.
  3. Turn on your TV.
  4. Press and hold the TV key.
  5. While holding down the TV key, press the OK key.
  6. Release both keys. The Device Keys will blink twice.
  7. Enter the 4-digit TV code you circled. The TV key will blink three times.
  8. To test to see if this was the correct code, point the remote at your TV and press Power. If the TV turns off, you have successfully programmed your remote.
  9. If the TV does not turn off, repeat all the steps using the next code in the list.
  • For future reference, write down the code that worked, in case you must reprogram your remote.
NOTE: If some of the keys on the remote do not operate your TV as you would expect, then you can try the next code in the list for your brand of TV.
To program the remote to control a VCR or DVD player, press and hold the DVD key, instead of the TV key, in steps 4 and 5. To program an audio receiver, press and hold AUX instead. You can assign a DVD or VCR to the DVD key. The AUX key is reserved for audio receivers, amplifiers and VCRs.
NOTE: The remote will exit the programming mode after 20 seconds if no key is pressed.

CODE SEARCH PROCEDURE
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices, use the appropriate Device Key instead of the TV key, in steps 2 and 3.)
  1. Turn on your TV.
  2. Press and hold the TV key.
  3. While holding down the TV key, press the OK key.
  4. Release both keys. The Device Keys will blink twice.
  5. Press (9- 2- 2.)
  6. Point the remote at the TV.
  7. Press  [> ||]
  8. Press [>>]. Every time you press[>>], the remote sends out a new power-off command to the TV. Keep pressing [>>] until the TV turns off. (You can press [<<] to go back.)
When the TV turns off, you have found the right code. Press OK to store this code.

  There are over 200 TV and DVD codes. The most common codes are tried first, but you may still need to press (>>) 200 times to find the right code. If you reach the end of the list of codes, the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing “Exit”.
Posted By: FRANK at 02:42
TAG: ,