REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday, 5 March 2019

YAMAHA DIGITAL SOUND PROJECTOR - YSP-1000 - FIRMWARE UPDATE - SELF DIAGNOSTIC MENU – SMPS POWER SUPPLY BOARD SCHEMATIC – FAN3641 - AUDIO SYSTEM REPAIR AND SERVICE

YAMAHA DIGITAL SOUND PROJECTOR - YSP-1000 - firmware update - self diagnostic menu – SMPS Power supply board schematic – FAN3641 - Audio system repair and service

Category: Audio System Repair and Service 

Contents of this article 

  • Firmware Update Procedure
  • Self Diagnostics 
  • SMPS Power supply Schematic 


YAMAHA YSP-1000

UPDATING FIRMWARE
After replacing the following parts with the replacement parts, update the firmware. IC11 of P.C.B. ASS’Y DSP : X6962B00 ... Writing of DSP
IC17 of P.C.B. ASS’Y DSP : X7073B00 ... Writing of DSP APPLICATION / SPID
IC26 of P.C.B. ASS’Y DSP : X6894A00 ... Writing of CPU
Required tools
DOS/V machine, OS: Windows 98/2000/Me/XP, PC with a serial port (RS232C)
Program upgrading program
There are 2 program upgrading programs.
Writing of CPU : DSP_FLASHER(YSP).exe
Writing of DSP : DSP_FLASHER(YSP).exe
Writing of DSP APPLICATION / SPID
spDownloader_2_0_x_xxx.exe.
Firmware
 Be sure to put following 4 firmwares in the same folder.
CPU ..... SA2_10Vx.mot
DSP ...... YSPx00_verxxxx.hex
DSP APPLICATION ...... ysp2app_YSP2-0_xxxxx_.hex
SPID ........ Y10xxxxxx.bin
Preparation and precautions before starting the operation
# Download DSP_FLASHER(YSP).exe and spDownloader_2_0_x_xxx.exe from the specified source to the PC being used.
# Prepare the above specified RS232C cross cable.
# While writing, keep the other application software on the PC closed. It is also recommended to keep the software on the task tray closed as well
Operation Procedure
Writing of CPU
1. Install DSP_FLASHER(YSP).exe into the PC.
2. Before turning on the power to YSP-1000 and PC, connect between RS232C ports with the RS232C cable
3. While pressing the reset switch of YSP-1000, connect the power cable to the AC outlet.
* Use a fine tipped pin or the like to push the reset switch.
4. Start up DSP_FLASHER(YSP).exe, the screen will appear
5. Select the data to be transmitted and port.
MOT FILE
Select “SA2_10Vx.mot”.
RS232C
Select the port of RS-232C.
The port selection varies depending on OS of the PC.
Windows 98/2000/Me .......... COM1~4
Windows XP ......................... COM1~2
As no port other than the above can be used, select the port using the setting of the PC.
6. Press the [E.P.] button and start writing.
7. When the program transmission is completed, the screen appears .
Then press the [OK] button to end the procedure.
8. Disconnect the power cable of YSP-1000 from the AC outlet
Writing of DSP
1. Install DSP_FLASHER(YSP).exe into the PC.
2. Before turning on the power to YSP-1000 and PC, connect between RS232C ports with the RS232C cable
3. Start up DSP_FLASHER(YSP).exe, the screen will appear.
4. Select “YSP DSP” Tag.
5. Select the data to be transmitted and port.
DSP HEX FILE
Select “YSPx00_verxxxx.hex”.
RS232C
Select the port of RS-232C.
The port selection varies depending on OS of the PC.
Windows 98/2000/Me .......... COM1~4
Windows XP ......................... COM1~2
As no port other than the above can be used, select the port using the setting of the PC.
6. Press the [RDY] button.
7. Connect the power cable of YSP-1000 to the AC outlet. While pressing the “VOL+” key and “VOL-” key of the YSP-1000, press the “STANDBY/ON” key of the remote control to activate the DIAG function.
a. Using the “UP” or “DOWN” key of the remote control, select the DIAG menu
b. Using the “LEFT” or “RIGHT” key of the remote control, select the DIAG sub-menu.
c. Using the “ENTER” key of the remote control, make a change.
8. When the program transmission is completed, the screen appears.
9. Check the SUM.
After downloading successfully, the value of “SUM from SET” is appeared.
The procedure is completed when the value is obtained for “SUM from FILE” and “SUM from SET”.
10.Press the “STANDBY/ON” key of the YSP-1000 to turn off the power.
Writing of DSP APPLICATION / SPID
1. Install spDownloader_2_0_x_xxx.exe into the PC.
2. Before turning on the power to YSP-1000 and PC, connect between RS232C ports with the RS232C cable (cross cable). (Fig. 1)
3. Connect the power cable of YSP-1000 to the AC outlet.
While pressing the “VOL+” key and “VOL-” key of the YSP-1000, press the “STANDBY/ON” key of the remote control to activate the DIAG function.
a. Using the “UP” or “DOWN” key of the remote control, select the DIAG menu
b. Using the “LEFT” or “RIGHT” key of the remote control, select the DIAG sub-menu.
c. Using the “ENTER” key of the remote control, make a change.
d. For restarting, use the “STANDBY/ON” key of the YSP-1000 or the remote control.
4. Start up spDownloader_2_0_x_xxx.exe, the screen will appear.
5. Select the data to be transmitted and port.
COM Port
Select the port of RS-232C.
D/load Protocol
Select “SPCM Protocol”
6. Select Firmware and execute writing as follows. First, select DSP APPLICATION and perform steps a to e for writing.
Then, select SPID and perform steps a to d for writing.
a. Press the button beside the Source firmware Box.
And select the firmware.
# DSP APPLICATION : ysp2app_YSP2-0_xxxxx_.hex
# SPID : Y10xxxxxx.bin.
b. Confirm Software Target and press the [Download] button.
* When Source filename is selected, Software Target box is selected automatically.
* If Software Target is different, confirm again Source filename or re-open spDownloader.
c. After downloading sccessfully, “Downloaded ‘*****’ OK” is appeared. Confirm “FLASH Write ok” on the Serial Log window.
d. Press the [Done] button.
e. For restarting, use the “STANDBY/ON” key of the YSP-1000 or the remote control.
f. The display returns to screen (1).
Select SPID and perform steps a to d for writing.
7. Press the “STANDBY/ON” key of the YSP-1000 to turn off the power.
8. While pressing the “VOL+” key and “VOL-” key of the YSP-1000, press the “STANDBY/ON” key of the remote control to activate the DIAG function.
a. Using the “UP” or “DOWN” key of the remote control, select the DIAG menu.
b. Using the “LEFT” or “RIGHT” key of the remote control, select the DIAG sub-menu.
c. Using the “RETURN” key of the remote control, make a change.
d. Check the version of the firmware.
Using the “LEFT” key or “RIGHT” key of the remote control, have the DIAG menu displayed.
The procedure is completed when the same version shows.
9. Press the “STANDBY/ON” key of the YSP-1000 to turn off the power..
SELF DIAGNOSIS FUNCTION
Starting DIAG
To activate the DIAG function, press the “STANDBY/ON” key of the remote control while pressing V+ and V- keys of the main unit at the same time.
Starting DIAG in the protection cancel mode
If the protection function works and causes hindrance to trouble diagnosis, cancel the protection function as described below, and it will be possible to enter the DIAG mode.
Press the “STANDBY/ON” key while simultaneously pressing those two keys indicated in the figure above. At this time, keep pressing those two keys for 3 seconds or longer. In this mode, the “SLEEP” segment of the FL display of the main unit flashes to indicate that the mode is DIAG mode with the protection functions disabled.
Canceling DIAG
1. Before canceling DIAG, execute setting for PRESET of DIAG menu No.8 (Memory initialization inhibited or Memory initialized). * In order to keep the user memory stored, be sure to select PRESET INHIBIT (Memory initialization inhibited). Any protection history will remain in memory.
2. Turn off the power by pressing the “STANDBY/ON” key of the main unit or the “STANDBY” key of the remote control.
Display provided when DIAG started
When the monitor is connected, DIAGNOSTIC MENU appears on its screen as shown in the figure. (It remains on display until DIAG is cancelled.)
The FL display of the main unit displays the protection function history data and the version (1 alphabet) and the DIAG menu [sub-menu (THR ALL) of DIAG menu No.1 DSP THROUGH] a few seconds later.
Operation procedure of DIAG menu and SUB-MENU
There are 14 MENU items, each of which has some SUBMENU items.
DIAG menu selection
Select the DIAG menu by using the UP/DOWN
(Reverse) (Forward) key of the remote control.
SUB-MENU selection
Select the DIAG sub-menu by using the LEFT/RIGHT (Reverse) (Forward) keys.
Functions in DIAG mode
In addition to the DIAG menu items, functions as listed
below are available.
#Input selection
# Muting
# Night
# Power on/off
# Master volume
Functions related to the set menu are not available.
POWER SUPPLY BOARD SCHEMATIC 
USING FAN4631
CLICK ON THE IMAGE TO ZOOM IN 
Posted By: FRANK at 06:16
TAG: , , , , , ,