REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:

- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Saturday 21 August 2021

REPAIRING / SERVICING TV SONY KD-55XH9077

Technical description and composition of the TV SONY KD-55XH9077, type of panel and modules used. Module composition.
Composition  /  Specifications
SONY KD-55XH9077
LCD TV LED Smart UHD KD-55XH9077 | Year of manufacture: 2020
Screen diagonal: 54.6" (139cm)
Screen format: 16:9
Resolution: 3840x2160
LED backlight: LED Direct LED
Smart: Yes
Operating system: Android
HD support: 4K UHD, HDR
Viewing Angle: 178°
Progressive scan: Yes
Digital tuner: DVB-T, DVB-T2, DVB-C, DVB-S
Teletext: Yes
Multimedia: MP3, WMA, MPEG4, HEVC (H.265), Xvid, MKV, JPEG
Sound stereo: there is
Sound power: 20W
Interface: AV, HDMI x4, USB x2, Ethernet (RJ-45), Bluetooth, Wi-Fi 802.11ac
Headphone jack: yes
TV weight: with stand 17.5 kg
Without stand: 16.5 kg
Dimensions: with stand 1231x780x338mm
without stand 1231x710x70mm
Mains power consumption: 195W

SONY KD-55XH9077

SONY LED
Model: KD-55XH9077

Panel: YDAS055DND01

LED backlight: MBL-55030D612SN0-SN1

T-CON: 20Y_S65JU22MQV0.1 LMY550FF06-A

LED driver (backlight): 1-006-904-11 (100690311)

PWM LED driver: OZ9218AETN

Power Supply (PSU): AC21202 B55D-32E

PWM Power: PFC, PWM

MOSFET Power: N-FET TO-220F

MainBoard: 1-006-895-31 A5014782A

IC MainBoard: CPU, eMMC, DRAM, AUDIO, DC/DC

MainBoard: PE641ZP

Control: IR 1-003-969-12, WiFi: DHUR-SY63
General advice about LCD LED TV repair
Possible problems

- SONY KD-55XH9077 TV does not turn on and does not show any signs of turning on, the control buttons and the remote does not respond.

In such cases, the problem should be sought in the first place in the power module AC21202. Then we recommend to measure its output voltages, and if not, check the functionality of the power switches (N-FET TO-220F) and inverter rectifier diodes for possible short circuits.
If there is a breakdown in the secondary circuits of the inverter, the inverter can usually be short-circuited, and if there is a short in the primary circuit power elements, the mains fuse or the current sensor at the source of the switch will most often blow.
Mos-Fet switches used in switching power supplies usually fail due to the failure of other elements, which can take it out of key mode, or cause it to exceed the maximum current or voltage. These may be the circuits feeding the PWM controller, the damping or frequency-retaining circuits, or the negative feedback elements in the stabilization circuit. PWM controllers (PFC) PFC, PWM, if there is no external damage and short circuit between pins, are checked by replacing with known good ones.

- No picture, sound is present, all other TV functions work. When switching on, the picture may sometimes appear for a second.

Failure in these cases is usually most likely in the backlighting nodes of the display matrix. Often the cause is a faulty LED (breakage, short circuit, etc.), or connectors of the bars (strings) MBL-55030D612SN0-SN1, less often the LED-driver is faulty.
To check the LED strips for breakage without disassembling the panel can help, for example, a current source. It is not possible to open the series-connected PN-junctions with a simple multimeter, you will need a voltage of about several tens of volts.

READ HOW TO REPAIR THE TV LED BACKLIGHT --------------> HERE.


- The TV set doesn't turn on, the LED indicates standby or working mode, or blinks.

Repair or diagnosis of the motherboard 1-006-895-31 should begin with checking the stabilizers and power converters needed to power the chips and matrix. If necessary, software (software) should be updated or replaced.

Warning. Users and owners of TV sets KD-55XH9077, not having the appropriate qualifications, knowledge and experience, strongly recommend not attempting self-repair to avoid the negative consequences which could lead to total unrepairability of the device.

More on MainBoard repair

An exterior view of the MainBoard 1-006-895-31 is shown in the illustration below:

1-006-895-31

MainBoard Appearance



The main features of the device SONY KD-55XH9077:

A matrix (LED panel) YDAS055DND01 is installed.
Timing Controller (T-CON) 20Y_S65JU22MQV0.1 is used to control the matrix.
The LED driver 1-006-904-11 is used to power the backlight LEDs and is controlled by the OZ9218AETN PWM controller.
Forming the necessary supply voltages for all TV SONY KD-55XH9077 components is implemented by a power module AC21202, or its analogues using PFC, PWM and power switches N-FET TO-220F.
MainBoard - the main board (motherboard) is a module 1-006-895-31, with the use of chips CPU, eMMC, DRAM, AUDIO, DC/DC and others.
The PE641ZP tuner provides television program reception and channel tuning.

SONY KD-55XH9077 TV with a 54.6" (139 cm) 16:9 LCD screen diagonally. The LCD panel uses a backlighting of Direct LEDs.
The design and technical capabilities of the TV can realize an image in the highest quality UHD at a resolution of 3840x2160 pixels in the standard 4K UHD, HDR. Image processing is made by modern technology High Dynamic Range (HDR) with an extended range of brightness gradation.
The KD-55XH9077 has built-in SMART software and pre-installed Android OS. Video Processor supported file formats of multimedia: MP3, WMA, MPEG4, HEVC (H.265), Xvid, MKV, JPEG.
The power of the sound system is 20 W. NICAM stereo processing system and Sound Surround surround sound function is used.
External interface (connection to other devices) is supported by standard inputs and outputs: antenna input (RF), AV, HDMI x4, USB x2, Ethernet (RJ-45), Bluetooth, Wi-Fi 802.11ac. There is a headphone output. The digital tuner is capable of receiving DVB-T, DVB-T2, DVB-C, DVB-S, DVB-S2 TV channels.

Power consumption in mains mode is 195 W.

Overall dimensions: with stand 1231x780x338 mm, without stand 1231x710x70 mm.

TV weight: with stand 17.5 kg, without stand 16.5 kg.

Warning. The SONY KD-55XH9077 LED TV panel is the most expensive part of the TV.
Avoid hitting the glass and excessive pressure on the surface of the screen to avoid damage to the LED panel!
It is not safe to get any liquid on the screen. Sometimes a single drop of water is enough, if it drips down the glass onto the stubs, the TV may become unrepairable.