REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Monday, 25 March 2019

AMINET 530 YSER REMOTE CONTROL SETUP PROCEDURE

AmiNET 530 YSER REMOTE CONTROL SETUP PROCEDURE


SETUP PROCEDURE
  • To control the AmiNET530 press the STB button on the remote control. The STB mode–select button will light for one second to indicate that the mode has been set.
  • When any valid function button on the remote is pressed, the STB button will light to indicate that a command is being transmitted in STB mode.
  • Switching on or off:  To turn the AmiNET530 on or off
  • Press the power button on the Amino remote control.
  • When the AmiNET530 is switched on the status light on the front panel is on.
CONFIGURING THE REMOTE CONTROL
In order for the remote to transmit the correct signals to control the TV/DVD, the remote must be programmed with a code corresponding to the type of TV in use. Below is a set of instructions for programming TV codes into the remote. To program DVD codes into the remote repeat the steps below using the DVD mode button instead of the TV mode button:
  1. Identify the make of the TV; e.g. Sony, Philips etc.
  2. Find the TV make in the TV brand code tables in this manual. Most makes of TV have more than one brand code listed, if this is the case use the steps below to try all the codes until a suitable one is found. If no brand code exists for your make of TV contact your service provider for help.
  3. Press the TV Mode button and hold for 2.5 seconds.  The TV button will blink twice.
  4. Continue to hold down the TV mode button for another 2.5 seconds.  The TV button will blink twice again.
  5. Release TV mode button.
  6. Enter the 3-digit TV brand code from the list in this manual.  At each key press the mode button will blink.  If the TV brand code is accepted, the TV button will flash twice and go out when the 3rd digit is entered.
  • If the TV brand code is not accepted, the TV button will remain illuminated for 2.5 seconds and then go out. The remote will not have been programmed and the process will have to be repeated from the start.
  • During the programming steps if no is button pressed after 10 seconds, the TV button light will go out, the remote will not have been programmed and the process will have to be repeated from the start.
  • If, during programming, the TV button is pressed, the TV button will light for 2.5 seconds and go out.
  • The remote will not have been programmed and the process will have to be repeated from the start.
CONTROLLING A TV
  • To control the TV press the TV button on the remote control. The TV mode - select button will light for one second to indicate that the mode has been set.  
  • When any valid function button on the remote is pressed, the TV button will light to indicate that a command is being transmitted in TV mode.
CONTROLLING A DVD

  • To control the DVD press the DVD button on the remote control. The DVD mode select button will light for one second to indicate that the mode has been set.  When any valid function button on the remote is pressed, the TV button will light to indicate that a command is being transmitted in DVD mode.
    •
    Posted By: FRANK at 01:45
    TAG: , ,