REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:

- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday, 20 March 2019

ATLAS PATIENT MONITOR - DISASSEMBLE PROCEDURE & REPAIR [MEDICAL EQUIPMENT]

ATLAS PATIENT MONITOR - DISASSEMBLE PROCEDURE & REPAIR [MEDICAL EQUIPMENT]



BATTERY REMOVAL
  • Remove the two screws holding the battery door. Remove the battery door.
  • Remove the battery connector from the main PCB. Remove battery.
Rear Housing Removal
  • Remove the four Torx head machine screws. Use a #10 Torx driver.
  • Pull the rear housing away from the front panel. Take special care not to damage any cables.
  • Flip the housing forward. Take special care not to damage any cables.
Observe how hose fits in E-Pac Foam. The hose fits over wiring keeping wiring secure.
Printer cable and Display Cable Removal

  • Remove both Printer and Display PCB cables from the Main PCB.
Power Supply Ground Wire Removal
  • Remove the two ground connectors from power supply chassis.
Tie Wrap Removal
  • Cut the tie wrap that secures the ground wires to the E-pac foam.
CPU Removal
  • Remove the CPU from the Main PCB.
Main PCB Removal
  • Use a tool T-16654 to pry the main Board away from the Deflection Board. Pull the E-pac tab to the right as you pry. Support the Main PCB while titling it away.
Main PCB Side Connector Removal.
  • Remove the four connectors(power supply, fan, speakers, BP pump) from the side of the main PCB.
Main PCB Hose and Wire Removal.
  • Disconnect hoses and connectors. BP hose, ecg cable, temp cable (modles 622 and 623 only, SpO2cable, CO2cable (model 623 only)and ground wire (NelcorSpO2only) from main PCB.
NOTE: Notice how hoses and connectors fit on Main PCB.
Pump Removal.
  • Remove the pump assembly from the EPac foam.
NOTE: Notice how pump fits in E-Pac Foam and how wires are routed out of pump.
CO2Exhaust Removal.
  • Remove the CO2exhaust cover and remove the CO2 connector from the E-Pac foam.
Pryon PCB Removal.

  • Remove connectors from Pryon PCB. Pull Pryon PCB from E-Pac foam.