REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Monday, 25 March 2019

SANYO GXDB REMOTE CONTROL - SETUP INSTRUCTIONS

SANYO GXDB REMOTE CONTROL - SETUP INSTRUCTIONS



SETUP PROCEDURE
Before proceeding, find the codes for the devices you want to program, highlight or write them down.
  1. Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD).
  2. Press the device key, on the remote, that you wish to program (DVD, STB, or AUX).
  3. Press and hold SET until the red LED blinks twice, then release.
  4. Enter the first five-digit code for the device and brand that you wish to program. The LED blinks once as each digit is entered. If the code is valid, the LED blinks twice. [NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.]
  5. Aim the remote at the device and press POWER.  The device should turn off. If it does not, repeat steps 3–5, trying each code for your brand until you find one that works. If you cannot find a code that works, see “Searching for Your Code”.
  6. Repeat steps 1–5 for other devices you want to control.
CODE SEARCH METHOD
If your device doesn't respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code:
  1. Turn the device you wish to control on.
  2. Press the desired device key once.
  3. Press and hold SET until the red LED blinks twice, then release.
  4. Enter 9 9 1. The LED blinks twice.
  5. Press the device group number for your device type (see table below).
  6. Aim the remote at the device and press POWER.  The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to step 8.
  7. If device doesn’t respond, press CH+ and the remote will test the next code for that device type. Continue to press CH+ until the device turns off. [NOTE: Press CH– to try the previous code.]
  8. Now that you’ve found the correct code, press SET to save the code that worked for your device. The LED blinks twice to indicate that the code has been saved.  To search for other device codes, repeat steps 1 – 8.
NOTE: You can find out which five digit code is operating your equipment using “Checking the codes” instructions in your TV’s owner’s manual.

CODE DEVICE GROUP
0 à  Cable (Cable Converters, Video Accessories, Satellite Receivers)
2 à VCRs and DVD players
3 à  Audio (Audio Amplifiers, Audio Amp/Tuners, CD players.
Posted By: FRANK at 01:35
TAG: , ,