REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 1 March 2019

SHARP HR-GB201 HARD DISC RECORDER - HOW TO INSTALL THE FIRMWARE - HOW TO UPGRADE THE FIRMWARE

Sharp HR-GB201 Hard disc recorder - How to install the firmware - how to upgrade the firmware

How to Upgrade the Firmware – How to install the Firmware – How to format the Hard disc – How to connect the device to Personal Computer – How to disconnect it from PC –  Sharp PORTABLE JUKEBOX RECORDER HR-GB201 Hard disc recorder.
How to upgrade the firmware
For possible firmware upgrades, visit our support web site at: “http://sharp-world.com/products/netmd/index.htm”. You can download firmware files to your PC to upgrade this product.
Caution
When formatting the hard disc on this product, follow the above procedures. Do not use other tools such as a disc management tool, a formatting tool, etc. Functions of this product may be disabled.
1. Turn on the unit.
2. Connect the AC adaptor to the DC+5V socket and place the unit on
the cradle.
3. Connect the unit to a PC with a USB connection cable.
4. After Windows detects this unit as a portable hard disc, copy the
firmware file into this unit‘s ”FIRMWARE” folder.
5. Disconnect the unit from the cradle.  • The unit turns off automatically.
6. Turn on the power.
7. The unit turns off automatically. Turn it on to finish the upgrade.
Formatting the hard disc
The hard disc on this product is partitioned and formatted before shipment (normally you do not need to format it by yourself).  If you accidentally format the heard disc in other ways, partition and format it in the following way. Make sure to back up important data beforehand since all the data on the hard disc will be deleted.
Windows 98 Second Edition/Windows Millennium Edition 
1. Connect the unit to a PC with SHARP Music Manager installed.
2. Click the “My Computer” Icon.
3. Use mouse right slick on “SHARP” and then select “Format”.
4. Make sure the label name is “SHARP”.
5. Click “Start”.
6. When formatting is complete please disconnect the unit from the cradle. The unit turns off automatically.
7. Turn on the unit again, and the unit will automatically create the system folders which are required to be worked with SHARP Music Manager.
Windows 2000 Professional/ Windows XP Home Edition/Windows XP Professional
1. Connect the unit to a PC with SHARP Music Manager installed.
2. Click the “My Computer” icon.
3. Use mouse right click on “SHARP” and then select “Format”.
4. Select “FAT32” and make sure the label name is “SHARP”
5. Click “Start”.
6. When formatting is complete please disconnect the unit from the cradle. The unit turns off automatically.
7. Turn on the unit again, and the unit will automatically create the system folders which are required to be worked with SHARP Music Manager.
Caution:  When formatting the hard disc on this product, follow the above procedures. Do not use other tools such as a disc management tool, a formatting tool, etc. Function of this product may be disabled.
How to install the software
Exit all applications before starting the installation.
Insert the supplied CD-ROM into your CD-ROM drive  The "Software Installer" screen appears.
Click the "Install SMM" button.  The "Welcome" screen appears.
Click the "Next" button.  The "Choose Destination Location" screen appears.
Click the "Next" button.  The "Set Program Shortcuts" screen appears.
Click the "Next" button.
Click the "Next" button.
When the installation is completed, the "Setup Complete" screen appears.
Click the "Finish" button.  Check the "Yes, Launch the program file." box. After installation, SHARP Music Manager starts.
[If the "Software Installer" screen does not appear in step 1, double click the "autorun.exe" stored on the CD-ROM from Explorer, etc.  When you use Windows 98 Second Edition, insert the supplied CD-ROM and click the "Install W98SE Driver" button to install the driver.]
How to connect the unit to a PC
Connect the unit to a PC to transfer audio data.
Turn on the unit
2 Connect the AC adapter to the DC IN 5V socket and place the unit on the cradle.
3 Connect the unit to a PC with a USB connection cable. Connect the unit to a PC with a USB connection cable.  The hard disk access indicator (green) flashes.  Whilst the unit is connected to the PC, the screen  appears.
[It is recommended to use the AC adapter when connecting the unit to a PC. Otherwise data on the unit may be corrupted when batteries run out.  Do not disconnect a USB connection cable or remove the unit from the cradle whilst transferring data from a PC. Data on the unit may be corrupted.  The operation buttons on the main unit do not work if it is connected to a PC. Disconnect the PC to operate on the unit.]
Disconnecting the unit Windows 98 Second Edition
1 Double click "Safely Remove hardware" on the taskbar.
2 Select "TOSHIBA MK2004GAL USB Device", and then click "Stop".
3 Select "TOSHIBA MK2004GAL USB Device", and then click "OK".
4 "The USB Mass Storage Device can now be safely removed from the system" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
Windows Millennium Edition
1 Click "Remove Hardware" on the taskbar.
2 Click "USB Disk - Stop Drive".
3 "USB Disk can now be safely removed" appears.  Click the "OK" button and disconnect the USB connection cable from the PC.
Windows 2000 Professional
1 Click "Unplug or eject hardware" on the taskbar.
2 Click "USB Mass Storage Device - Stop Drive".
3 "USB Mass Storage Device can now be safely removed" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
Windows XP Home Edition/Professional
1 Click "Safely Remove Hardware" on the taskbar.
2 Click "Safely remove USB Mass Storage Device - Drive(*:)".
3 "Safe To Remove Hardware" appears. Click the message and disconnect the USB connection cable from the PC.
SYMPTOM:  Unit fails to operate permanently or intermittently.
CAUSE: Ribbon cable to the HDD.
ACTION:  Replace the HDD ribbon cable using the part number below.  Ensure that the replacement procedure outline below is followed when replacing the ribbon cable.
FPC cable kit => 9JC20203010010
Name Plate Right => 9JCE7830113011
Name Plate Left => 9JCE7830114011
To remove the casing, it is necessary to carefully pries off the two metallic strips (items A1 in the picture below). This is best carried out by heating gently with hot air and sliding a sharp object such as a craft knife underneath to break the seal. It will then be possible to remove the four securing screws (items A2) to allow further dismantling of the cabinet.
[Note that the two metallic strips are very fragile and can break very easily. The part number for these items is shown above.]
Posted By: FRANK at 01:36
TAG: , ,