How to disassemble Beko B13 B7S B7SLED washing machine- Front door and exterior door
Disassembly
of shock absorber, upper table, front door and exterior door
Equipment needed for disassembly and assembly.
Shock Absorber Pin Punching Apparatus
Before the shock absorber is punched into its place, practice is
performed at the bushings.
Shock absorber is attached onto the bracket and drum.
Only softener is applied onto the shock absorber pins.
Pin is attached onto it.
Punching gun is seated onto the bracket and pin.
Punching gun is squeezed and assembly is completed.
Punching gun is squeezed to the very end and assembly is
completed.
It will be checked after assembly.
Upper Table Assembly - Disassembly
Two sheet metal screws fixing the upper table to the body are
removed.
Upper table is removed by being lifted to backwards and then upwards.
Upper table is removed by being lifted to backwards and then upwards.
Two screws shown in Picture are removed.
Upper table is pulled back and removed from the tabs which are
shown.
Front Door Group Assembly/Disassembly
Front door
is opened.
Two screws of the hinge holder that serves as front door holder by the hinge are unscrewed and the holder is removed. Front door is separated from the hinge.
Two hinge screws fixing the hinge to the front door are removed and hinge is removed from the front door.
Two screws of the hinge holder that serves as front door holder by the hinge are unscrewed and the holder is removed. Front door is separated from the hinge.
Two hinge screws fixing the hinge to the front door are removed and hinge is removed from the front door.
Exterior Door
The bolts connecting the exterior door and interior door are
removed.
Exterior door will be removed from the interior door manually.