How to upgrade the Software, how to restore the product settings,
password change, full schematic
1) Restore
factory setting
a) Press
<Home> button on R/C.
b) Select
<SETUP>, then press “OK” button on R/C.
c) Select
<Advanced setup> ,then press < OK > button on R/C.
d) Select
<Restore default settings>,then press <OK> to confirm.
2) Password change
a) Press
<Home> button on R/C.
b) Select
<SETUP>, then press “OK” button on R/C.
c) Select
<preference setup>, then press <OK> button on R/C.
d) Select
<Change Password> <Confirm>, then press <OK> button on R/C.
“0000” is default password supplied,
3) Trade mode
a) In open model,
press <Home> button on R/C.
b) Press
“2” “5” “9” on R/C,VFD will display “TRA ON” or “TRA OFF”.
4) Check software version
a) Press <Home> button on R/C
b) Select
<Setup>, then press <OK> button on R/C.
c) Select
<Advanced Setup> <Version Info.>,then press <OK> button on
R/C.
d) TV will
show message.
e) Select
<Close> on the version display screen and press <OK> button to exit
.
5) Upgrading new software
Method 1:
Update software from a USB storage device
a) Create a
folder named “UPG_ALL” in your USB storage device, and Copy the latest
upgrading software into the folder.
b) Connect
the USB storage device to the home theater.
c) Press <Home> button on R/C, and select
<Setup>.
d) Select
<Advance Setup> <Software Update> <USB>.
e) TV will
show message.
The set
will shut down automatically when the software upgrade is completed.
Update software from the internet
Note: To
check for new updates, compare the current software version of your home
theater with the latest software version (if available) on the Philips web
site, and for BD-Live application and software update, make sure that the
network router has access to the Internet and the firewall is disabled.
a) The
“LAN” jack at the back panel of the set must be connect to the network router
via network cable and the set connect to TV.
The set
will shut down automatically when the software upgrade is completed.
6) How to replace the defective Blu-ray Loader
a) Remove
the defective Blu-ray Loader.
b) Remove
the shield cover at the top of Blu-ray Loader as shown.
c) Assembly
Blu-ray Loader to “J800”,”J900”,”J905” on the top of BD Board.
Note: The 2
ESD protection points on any one side must be soldered if
* the
Blu-ray Loader is OK and needs to be disconnected from connector J800, J900 and
J905 of the BD Board.
* the
defective Blu-ray Loader is needed to be send back to supplier for failure
analysis and to support back charging evidence.
8) Produce
to change Tuner grid
In some
countries, you can toggle the FM tuning grid between 50 kHz and 100 kHz.
Switching the tuning grid erases all preset radio stations.
a) Press
SOURCE repeatedly until RADIO appears on the display panel.
b) Press
and hold (Play) to toggle between 50 kHz or 100 kHz.
.Note: repealing
the same action will toggle back to it previous tuning grid setting.
9) Menu Language setup (only for 51 version)
a) Press <Home>
button on R/C.
b) Select
<SETUP>, then press “OK” button on R/C.
c) Select
<preference setup>, then press <OK> button on R/C.
d) Select
<Menu language>, then press <OK> button on R/C.
e) Select
<English>, then press <OK> button on R/C.
[Only a qualified service person
should reprogram the Region Code.]
Media formats
AVCHD, BD,
BD-R/ BD-RE, BD-Video, DVD-Video, DVD+R/+RW, DVD-R/- RW, DVD+R/-R DL,
CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture files, MP3 media, WMA media, DivX
(Ultra)/DivX PlusHD media, USB storage device.
Amplifier
Total
output power:
Europe and
Asia: 1000W RMS (30%THD)
Latin
America: 780W (10% THD)
Frequency
response: 20 Hz-20 kHz / ±3dB
Signal-to-noise
ratio: > 65 dB (CCIR) /(A-weighted)
Power supply:
Europe/China:
220-240 V~, 50 Hz
Latin
America/Asia Pacific: 110-127V/220-240 V~, 50-60 Hz
Russia/India:
220-240 V~, 50 Hz
Power
consumption: 105 W
Standby
power consumption: ≤ 0.5 W
Dimensions
(WxHxD): 435 x 57 x 356.5mm
Weight:
3.69 kg
Subwoofer Total output power:
Europe and
Asia: 230W RMS (30%THD)
Latin
America: 180W RMS (10%THD)
Impedance:
3 ohm
Speaker drivers:
Europe and
Asia:165 mm (6.5”)woofer
India and
Latin America: 203 mm (8”) woofer
Frequency
response: 20 Hz-150 Hz
Dimensions
(WxHxD): 196 x 395 x 342(mm)
Weight: 4.8
kg
Cable
length: 3 m
Total
output power:
Europe and
Asia: 4 x 135W RMS(30% THD)
Latin
America: 4 x 105W RMS (10%THD)
Speaker
impedance: 5ohm
Speaker
drivers: 2 x 76.2 mm (3”) full range
Frequency
response: 150Hz-20kHz
Dimensions
(WxHxD):
small
speakers:100 x 280 x 104mm
Weight:
Small
speakers: 0.98-1.07 Kg each
Cable
length (front speakers):4m
Cable
length (rear speakers):10m.
Service position
In some service positions the components or
copper patterns of one board may risk touching its neighboring pc boards or metallic
parts. To prevent such short-circuit use a piece of hard paper or other
insulating material between them.
Main amplifier board schematic
Power board (SMPS) schematic and PWB
Voltage chart
Touch board schematic
VFD, USB, MP3, AUX board schematic
Exploded view
