REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday 26 February 2019

HOW TO SYNCHRONISE UNIVERSAL REMOTE CONTROLS TO TVs

HOW TO SYNCHRONISE UNIVERSAL REMOTE CONTROLS TO TVs


These are the proceedings to synchronise most of the universal remote controls.  Find the code to your device, from the code list of the remote control [attached document].

# Press and Hold the "Setup" button on the remote control, until the red indicator on it stays lit, and relese "Setup" button.

# Press and Release the desired "Mode" button, [TV,DVD,VCR etc:-].  The red indicator on the remote control will blink once, and then will stay lighted.

# Enter the code for your device using digit buttons on the remote control.  After a valid entry, the indicator will turn OFF.  If the entered code is invalid, the indicator will flash.  You have to try an other code now.
(NB: Before trying an other code, the device to which the remote code should be synchronised, must turn OFF by its main power switch and must turn it back.)

# If the indicator switches OFF after a code entry, press CH+ OR CH-ve  button on the remote control.  If the unit responds to these actions, no further programming is desired.
If some button/s does not operate your device, try one of the other codes for your device.  Select the code, which has maximum functionality.

If your device do not respond to any given codes, just try a Code Search Method.

1. Manually turn ON the device to be controlled.
2. Press and Hold the "Setup" button, until the red indicator on the remote stays ON.  Release the Setup Button.
3. Press and Release the desired Mode button, as described above. The red indicator will blink once and will stay lighted.
4. Press the "CH UP"  button repeteadely, until the device to be controlled will chage channel.  Do this with patience.  Sometimes, you might press this button upto 300 times or so.

Identifying codes found using the code search procedure.

* Press and Hold the SETUP until the LED indicator lights up steadily.  Release setup button.
* Press the Mode button that matches the equipment you want to identify.
* Press and Release "SETUP". The LED will blink once.
* To find the first digit, press each number button from "0" to "9" until the LED blinks.  The number you presse is the first digit of the code.
* Press each number button from "0" to "9" again as above to find the second digit.
* Press each number button from "0" to "9" again as above to find the third digit.
* Press each number button from "0" to "9" again as above to find the fourth digit.  When the fourth digit has been found. the LED will switch OFF automatically.
Posted By: FRANK at 05:47
TAG: