REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Saturday, 9 February 2019

NOKIA - 6230 _ 6320B RH-12_RH-28 _ PHOENIX SERVICE SOFTWARE INSTALLATION PROCEDURE

NOKIA - 6230 _ 6320B RH-12_RH-28 _ PHOENIX SERVICE SOFTWARE INSTALLATION PROCEDURE







  • Check that dongle is attached to the parallel port of the computer.
  • Download the installation package (e.g. phoenix_service_sw_a12_2003_50_6_35.exe) to your computer (e.g. C:\TEMP).
  • Close all other programs.
  • Run the application file (e.g. phoenix_service_sw_a12_2003_50_6_35.exe) and follow instructions on the screen.

  1. Administrator rights may be required to be able to install Phoenix depending on the Operating System.
  2. If uninstalling or rebooting is needed at any point, you will be prompted by the Install Shield program.
  3. If at any point during the installation you get this message, the dongle is not found and the installation can not continue.
  4. Possible reasons may be defective or too old PKD-1Dongle (five digit serial number dongle when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or power to it is not supplied by external charger.
  5. First, check the COM /parallel ports used! After correcting the problem, the installation can be restarted.

INSTALLING PHOENIX

  • Run the phoenix_service_sw_a12_2003_50_6_35.exe to start the installation. Install Shield will prepare.

  • Click "Next" in Welcome dialog to continue.

  • Choose the destination folder, it is recommended to use the default folder C:\Program- Files\Nokia\Phoenix.
  • Choose “Next” to continue. You may choose another location by selecting “Browse” (not recommended).

  • Setup copies the components; progress of the setup is shown. Please wait.

  • Drivers will be installed and updated, please wait. The process may take several minutes to complete.

  • If the operating system does not require rebooting (Windows 2000, XP) the PC components are registered right away.

  • Click "Finish" to finalize. Phoenix is ready for use.

  • If the operating system used requires restarting your computer (Windows 98, SE, ME), the Install Shield Wizard will notify you about it. Select "Yes..." to reboot the PC immediately and "No..." to reboot the PC manually afterwards.

  • After the reboot components are registered and Phoenix is ready for use. Note that Phoenix doesn't work, if components are not registered.

Now the installation of Phoenix Service SW is ready and it can be used after :
  • installing Phone model specific Phone Data Package for Phoenix
  • configuring users and connections.


FLS-4S can be used right away.
FPS-8* can be used after updating Flash Update Package files to it.
Posted By: FRANK at 04:31
TAG: , , , ,