REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday, 13 February 2019

SAGEM AXIUM - HD - D45EU FAULT DIAGNOSIS - DISASSEMBLE

SAGEM AXIUM - HD - D45EU FAULT DIAGNOSIS - DISSASSEMBLE

AXIUM ARCHITECTURE
For 'Axium' choice has been mad to use 2 trapezoidal mirrors with two main advantages.
  1. Reduction of the product depth.
  2. Possibility to setup the image geometry by acting on the <<small>> mirror with completely fixed optic.
The front panel LED allow to get a first level of diagnose regarding breakdown.  
A colored code using the indicators have been instaured  in order to detect different type of breakdowns.  When a problem is detected , the set goes automatically to standby; except in the case of incident on the optical engine, it is possible to reset the TV.
'LED' BINKING CODES

State
Temperature indicator
Lamp indicator
Stand-by indicator
After powering [in-standby]
----
----
Fixed Red.
Out of standby
----
----
Flashing Orange
Step 1 of the standby phase
----
----
Flashing Green
Step 2 of standby phase
----
----
Flashing Orange
Out of standby phase – Life duration of the lamp: 7500 hours
----
Flashing Red-10 seconds and then Off.
Flashing Orange.
Out of standby phase – Life duration of the lamp : 8000 hours.
----
Flashing Red 10 seconds, then Fixed Red for 5 seconds, then shutdown.
Flashing Orange
Temperature of optical engine
Fixed Red
--
Flashing Orange | Fixed Red.
Temperature fromatter
Fixed Red
Fixed Red
Flashing orange | Fixed Red.
Thermal switch
Fixed Red
Fixed Red
Flashing Orange | Fixed Red.
Lamp fan
Flashing Red
Flashing Red
Flashing Orange | Fixed Red.
DMD fan
Fixed Red
Flashing Red
Flashing Orange | Fixed Red.
Color wheel
----
Flashing Red
Flashing Orange | Fixed Red.
Lamp problem
----
Flashing Red
Flashing Orange | Fixed Red.




DISASSEMBLE MODULES
Removal of card door.
  • Remove the right cap.
  • Remove 2 screws.
  • Disconnect the cable from the card door and its lug.
  • Unscrew the two screws torx CBLX x 3*8
  • Remove the card.
REMOVAL OF THE MAIN BOARD CARD
  • Remove back plate.
  • Remove the right trap.
  • Remove the left trap.
  • remove the right and left corners.
  • Remove 2*2 screws CBX4*12
  • Remove back plate.
  • Remove 8 screws from the RCA and SCART base plates.
  • Remove two hexagonal spaces of DVI base plate.
  • Remove three scres
REMOVAL OF THE MAIN BOARD AND ITS SHIELDING
  • Gently unplug; without pulling the cables and lugs; situated at the back of the upper part of the card.
  • remove 8 black screws, and a steel screw
  • Remove the rear shielding | main board unit.
  • Remove then the last 5 steel screws to exchange the main board.
DISASSEMBLING POWER SUPPLY
  • Remove 4 screws
  • Pull it towards front, until able to unwire.  Start to unwire the upper cables.
  • Remove 7 screws 
  • Unplug the cable of internal sector as well as the Ground resumption lug.

Posted By: FRANK at 04:56
TAG: , , , ,