SAMSUNG LN26C350D1D LN32C350D1D SERVICE MODE
TO ENTER SERVICE MODE
- Turn the Power Off the set to Stand-by.
- Press {Mute => 1 => 8 => 2 => Power On} to turn the set On.
- The set turns On and enters Service mode. This may take approximately 20 seconds.
- Press the "Power" button to 'Exit' and store data in memory.
- Initial Service Mode Display state.
- To 'EXIT' factory mode, Turn the Power Off LCD TV set by remote control or power cord.
=============================================
OPTION
ADC/WB
Control
Advanced
T-SAT4AUSHC - XXXX
DTP-LP--App-XXXX-XX
ADC - HDMI X COMP X PC X AV X
EDID : SUCCESS
HDCP : SUCCESS
Build Date: XX-XX-XXXX
Date of Purchase : xx/xx/xxxx
==============================================
To enter hidden Factory Mode
- Enter into Factory Mode.
- Highlight 'Advanced'.
- Key input: 0 + 0 + 0 + 0
- Hidden Menu : Advanced.
BUTTONS OPERATIONS WITHIN SERVICE MODE
Menu
|
Full Menu Display / Move to Parent Menu
|
Direction keys UP | DN
|
Item selection by Moving the Cursor.
|
Direction keys > | <
|
Data increase/Decrease for the selected item.
|
Source
|
Cycles through the active input source that are connected
to the unit.
|
EDID REWRITE METHOD
- Into Factory Mode.
- Enter Factory Menu 'Control \ EDID'.
- Change 'EDID ON/OFF => ON, by direction key ' > '.
- Change 'EDID WRITE ALL => success' by Direction key ' > ' again.
- Change 'EDID ON/OFF: On => OFF, by Direction key '>'.
Sub Option
|
Factory name
|
Data
|
Range
|
Panel display time
|
Xhr
|
||
Dimm type
|
EXT
|
INT/EXT/INT_NEG/INT_POS/EXT_NEG
|
|
Watchdog
|
On
|
On / off
|
|
LVDS Format
|
JEIDA
|
JEIDA \ VESA
|