HOW TO DISASSEMBLE- SHARP CD-C661H
SHARP CD-C661H - CD-C661HR -- CD-C661H mini
component system consisting of CD-C661H (main unit) and CP-C661H (speaker
system)_disassemble procedure.
Output power: PMPO; 880 W (total) (CD-C661H
Except for MPO; 440 W (220 W + 220 W) U.K./CD-C661HR) (DIN 45 324) RMS; 300 W (150 W + 150 W) (DIN 45 324)
Output power: RMS; 300 W (150 W + 150 W) (CD-C661H For U.K.) (10 % T.H.D.)
Output terminals: Speakers; 6 ohms
Headphones: 16-50 ohms (recommended; 32 ohms)
CD digital output (optical)
Output power: RMS; 300 W (150 W + 150 W) (CD-C661H For U.K.) (10 % T.H.D.)
Output terminals: Speakers; 6 ohms
Headphones: 16-50 ohms (recommended; 32 ohms)
CD digital output (optical)
Pickup Unit Ass’y: 92LHPC1MASY
Pickup Unit: (Not Replacement Item)
DISASSEMBLY
* Take cassette tape and compact disc out of the unit.
* Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
* Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling.
* Take sufficient care on static electricity of integrated circuits and other circuits when servicing.
* Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
* Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling.
* Take sufficient care on static electricity of integrated circuits and other circuits when servicing.
HOW TO OPEN THE CHANGER
Change, turn fully the lock lever in the arrow direction through
the hole on the loading chassis bottom in this state. After that, push forward the CD player base.
[After removing the connector for the optical pickup from the connector, wrap the conductive aluminum foil around the front end of connector to protect the optical pickup from electrostatic damage.]
[After removing the connector for the optical pickup from the connector, wrap the conductive aluminum foil around the front end of connector to protect the optical pickup from electrostatic damage.]
Be careful when installing the CD changer mechanism. Install the CD changer mechanism on the CD
player base after the shift lever has been set in the highest position.
DISASSEMBLING THE SPEAKER BOX
LOADING MOTOR & PICKUP REMOVAL
Remove the screws (A1) x 2 pcs., to remove the loading motor.
Remove the screws (B1) x 2 pcs., to remove the shaft (B2).
Remove the stop washer (B3) x 1 pc., to remove the gear (B4)
Remove the stop washer (B3) x 1 pc., to remove the gear (B4)
[After removing the
connector for the optical pickup from the connector, wrap the conductive aluminum
foil around the front end of connector to protect the optical pickup from electrostatic
damage.]
CLICK ON THE PICTURES TO ZOOM IN