PANASONIC SA-BT230P - SA-BT330P BLU-RAY DISC HOME THEATER SOUND SYSTEM SERVICE MODE INITIALIZING AND POWER SUPPLY CIRCUIT

PANASONIC SA-BT230P - SA-BT330P BLU-RAY DISC HOME THEATER SOUND SYSTEM SERVICE MODE INITIALIZING AND POWER SUPPLY CIRCUIT

PANASONIC SA-BT230P - SA-BT330P 

BLU-RAY DISC HOME THEATRE SOUND SYSTEM 

SERVICE MODE INITIALIZING AND POWER SUPPLY CIRCUIT 

Service Navigation
This service manual contains technical information which will allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with the original service manual.
BD Drive & Digital Circuitries:
1) This service manual does not contain the following information, due to the impossibility of servicing at component level.
- Exploded View and Replacement Parts List for individual parts of BD Drive.
2) The following category are recycle module part. Please send them to Central Repair Center.
- BD Drive & Main P.C.B. Assembly (BT230P: RFKNBT230P)
(BT230PC: RFKNBT230PC)
(BT330P: RFKNBT330P)
(BT330PC: RFKNBT330PC)

Wireless system
1) This model supports to wireless surround (SH-FX71PP).

Removing of disc during abnomality
Using main unit key buttons.
When the power can be turned off.
1. Turn off the power and press & hold [SKIP FWD] button on remote and [OPEN/CLOSE] button on main unit for 5 seconds.
When the power cannot be turned off.
1. Press & hold the [POWER] button to turn off the power forcibly, then press & hold [SKIP FWD] button on remote and [OPEN/
CLOSE] button on main unit for 5 seconds.
Using service eject pin.
1. Turn off the power and remove AC cord.
2. Remove the Top Cabinet.
3. Remove BD Drive.
4. Insert Eject Pin (JZJ0484) into the hole on the bottom of BD Drive and slide the eject Pin in the direction of the arrow to eject
tray slightly.
5. Remove disc.

Initialize Mode

Press & hold [VOL+], [OPEN/ CLOSE] follow by [POWER] button in sequence during power off.

All the main unit’s parameters are initialized.
1) Unit power-up
2) FL shows "Hello" then "goodbye"
3) Unit power-down
4) Unplug & plug AC Cord

Rating password

Press [SKIP REV] on remote control, follow by [PLAY] on main unit simultaneously for five seconds when power-on.

The audiovisual level setting password is initialized to Level 8

Forced disc eject

When power is off, press [SKIP FWD] on remote control & [OPEN/ CLOSE] key on main unit simultaneously for 5 seconds or more.

Removing a disc that cannot be ejected. The tray will open and unit will shift to P-off mode.
While Demonstration Lock is being set, this Forced disc eject function is not accepted.

Forced power-off

Press [POWER] over than 10 seconds.

When the power button is not effective while power is ON, turn off the power forcibly.

Aging

When the power is ON, press [SKIP FW], [PLAY] & [OPEN/ CLOSE] simultaneously for over 5 seconds and less than 10 seconds.

NOTE1:
If Unit has not turned into Aging mode by operations shown above, execute TEST MODE once and reexecute operation shown above.
(*All the main unit s parameters include tuner are initialized by TEST mode.)
NOTE2:
If the unit has hung-up because of pressing keys for over 10 seconds, once turn off the power, and re-execute this command.
*When releasing Aging mode, press [POWER] key over 10 seconds.

Demonstration lock/ unlock

When the power is on, press [PLAY] and [OPEN/CLOSE] keys simultaneously for 5 seconds.

Note:
When a disc is not in tray, this setting is not effective.

Progressive initialization

When the power is on (SS mode), press [STOP] and [PLAY] simultaneously for 5 seconds.

Micro-P version check

When the power is on, press & hold [SKIP REV] on remote control follow by [POWER] on main unit.

Error Code Table (For BD)

Error Code	Diagnosis contents
U30	Remote control code error
U59	Abnormal inner temperature detected
U71	HDMI incompatible error (HDCP incompatible)
U72	HDMI connection error (communication error)
U73	HDMI connection error (authentication error)
F99	Hang-up
H19	Inoperative fan motor
F00	No error information
F34	Initialization error when main microprocessor is started up for program recording
F58	Drive hardware error
UNSUP PORT	Unsupported disc error
NO READ	Disc read error
HARD ERR	Drive error
SELF CHECK	Restoration operation
PLEASE WAIT	Unit is in termination process
UNFORMAT	Unformatted disc error
No PLAY	When there is a viewing restriction on a BD-Video or DVD Video.

Error Code Table 3 (Power Supply & Digital Amplifier)

Error Code	Diagnosis Contents
F61	The abnormalities in an output or power supply circuit of POWER AMP
F76	Abnormality in the output voltage of stabilized power supply
H19	Fan Unit & its circuitries

Service Mode
To enter service mode: While the power is off, press & hold [VOL+] & [OPEN/CLOSE] button on main unit for 3 secs or more follow by [PLAY] button on main unit.

POWER SUPPLY CIRCUIT 

CLICK ON THE IMAGE TO ZOOM IN