Acer Iconia B1-711 – Disassembling procedure - How to remove the battery – How to remove the case
Acer Iconia B1-711: DISASSEMBLING PROCEDURE
Switch-off
the tablet.
Remove any SIM and/or Memory Card.
Start opening near to the Volume Up/Down buttons. It's more well to use a plastic opening tool to avoid damaging the cover.
When lifting the cover, be careful not to tear the Loudspeaker cable at the bottom right side.
Disconnect the Loudspeaker cable from the Logic board.
Remove any SIM and/or Memory Card.
Start opening near to the Volume Up/Down buttons. It's more well to use a plastic opening tool to avoid damaging the cover.
When lifting the cover, be careful not to tear the Loudspeaker cable at the bottom right side.
Disconnect the Loudspeaker cable from the Logic board.
Before
doing anything, disconnect the battery.
With
a long plastic tool like a spudger, unstick the battery from the metal LCD
shield.
Lithium
Ion Battery Pack - 3.8V, 2710mAh
Disconnect
and remove the Audio Jack Board flex cable.
Unscrew
2x Philips screws
Remove the board with the Audio Jack Connector.
Remove the board with the Audio Jack Connector.
Remove
the Audio jack flex cable.
Remove
the metal plate which is placed on the camera connector.
Disconnect the camera flex cable.
Disconnect the camera flex cable.
Remove
the camera.
Remove
the tape from the microphone.
Disconnect
the Microphone wires and remove the Microphone.
Remove
the green rubber and disconnect the touch screen flex cable.
Disconnect
the 4 coaxial antenna cables (Wi-Fi, GPS, 3G).
Carefully unstuck the metal folio from the LCD display flex cable.
Remove the 3x Phillips screws.
Carefully unstuck the metal folio from the LCD display flex cable.
Remove the 3x Phillips screws.
Lift
the board from the side of the battery connector and turn it around the display
connector
on 360 degrees.
Be careful for the flex cable!
Disconnect the LCD display flex cable.
Be careful for the flex cable!
Disconnect the LCD display flex cable.
This
is the Logic board