REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Thursday 11 April 2019

SONY HBD-TZ215 – HBD-TZ715 – HOW TO REMOVE THE TRY – HOW TO ACCESS TEST MODE – COLD RESET PROCEDURE

SONY HBD-TZ215 – HBD-TZ715 – how to remove the try – How to access test mode – Cold reset procedure



RELEASING THE DISC TRAY LOCK
Releasing Procedure :
1. Press the [POWER] button to turn the power on.
2. Press the [FUNCTION] button to set DVD/CD function.
3. Press the [STOP] button and the [EJECT] button simultaneously for five seconds again.
4. The message “UNLOCKED” is displayed and the tray is unlocked.
Note: When “LOCKED” is displayed, the tray lock is not released by turning power on/off with the [POWER] button.

HOW TO OPEN THE DISC TABLE WHEN POWER SWITCH TURNS OFF
Insert a tapering driver into the aperture of the unit bottom, and slide it in the direction of the arrow. Insert a screwdriver between the front panel and the chassis and slide the rod in the direction of the arrow (Tray opening ).

HOW TO DISCHARGE THE CAPACITORS 

Use a resistor of 800 ohms, 2 Watts for discharging the following capacitors.
POWER board primary side C903: 390V and on secondary side  C932, C933, C934, CN904: 30V

TEST MODE

COLD RESET
Procedure:
1. Press the [POWER] button to turn the power on.
2. Press three buttons [PLAY], [FUNCTION] and [POWER] simultaneously.
3. When this button is operated, display as “COLD RESET” for a while and all of the settings are reset.
PANEL TEST MODE
This mode is used to check the software version, fluorescent indicator tube and keys.
Procedure:
1. Press the [POWER] button to turn the power on.
2. While pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [MASTER VOLUME] rotate in the direction of Volume up.
3. When the panel test mode is activated, all segments are turned on.
Releasing method :
While pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [MASTER VOLUME] rotate in the direction of Volume up.

FL pattern test mode
This mode can confirm the pattern of fluorescent indicator tube.
Procedure:
1. When the panel test mode is activated, press the [EJECT] button, to select the FL pattern test mode. When the FL pattern test mode, half segments of fluorescent indicator tube.
2. Press the [EJECT] button, half segments of fluorescent indicator
tube.
3. Next press the [EJECT] button, all segments of fluorescent indicator tube is turn on.
Releasing method :
While pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [MASTER VOLUME] rotate in the direction of Volume up.
Key test mode
This mode can confirm the operation of keys.
Procedure:
1. When the panel test mode is activated, press the [POWER] button, to select the key test mode.
2. To enter the KEY test mode, the fluorescent indicator displays “K0 V0”. Each time an another button is pressed, “KEY” value increases. However, once a button is pressed, it is no longer taken into account. When all keys are pressed correctly, “K6 V0”/“OK V0” are displayed.
3. When the [MASTER VOLUME] dial is turned in the direction of (+), “V0” is changed to “V1”, then ... “V9”. When the [MASTER VOLUME] rotate in the direction of Volume Down, “V0” is changed to “V9”, then ... “V1”

Releasing method :
While pressing the [STOP] and the [PLAY] buttons simultaneously, turn the [MASTER VOLUME] rotate in the direction of Volume up.
DISC TRAY LOCK
Procedure :
1. Press the [POWER] button to turn the power on.
2. Press the [FUNCTION] button to set DVD/CD function.
3. Insert a disc.
4. Press the [STOP] button and the [EJECT] button simultaneously for five seconds.
5. The message “LOCKED” is displayed and the tray is locked.
Releasing method :
1. Press the [STOP] button and the [EJECT] button simultaneously for five seconds again.
2. The message “UNLOCKED” is displayed and the tray is unlocked.
Note: When “LOCKED” is displayed, the tray lock is not released by turning power on/off with the [POWER] button.


HOW TO ENTER TEST MODE
While pressing the [STOP] and the [EJECT] buttons simultaneously, turn the [MASTER VOLUME] rotate in the direction of Volume up with the DVD player in power on.
Posted By: FRANK at 02:02
TAG: , ,