Nokia XL Dual – Disassembling procedure – How to remove the flash – How to remove the headphone jack
Nokia XL Dual
You
will first need to separate the back cover from the device.
Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar item.
Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar item.
Once
the back cover is removed, the battery will be in plain sight. It will need to
be removed.
You
can use a plastic opening tool to lift the battery. From there, you can simply
remove it.
To
access the inner components of the device, you will need to remove the various
screws that are on the device
You
will need a T5 Precision Torx screw driver to remove the screws.
The locations of the T5x3.4mm screws are indicated in the picture.
The locations of the T5x4.1mm screws are indicated in the picture.
The locations of the T5x3.4mm screws are indicated in the picture.
The locations of the T5x4.1mm screws are indicated in the picture.
You
will need to use the plastic opening tool to gently pry the device apart.
There
are flaps on both sides of the phone as indicated in the picture. This is what
you will need to pry apart. Please be cautious when opening the device. There
are various connectors inside the device that must be handled with care.
Once
the device is opened you can take note of all the components
With
tweezers, gently undo the motherboard connector for the vibrator, headphone
jack and camera flash assembly.
With
tweezers, gently pry upward on the rectangular metal piece on the back of the
camera flash.
With
tweezers, gently pry upward on the vibrator.
With
tweezers, gently pry upward on the headphone jack.
With
tweezers, gently pry up on the proximity sensor.
The
entire assembly can now be removed.