REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Saturday, 23 February 2019

GRUNDIG - BEKO IDTV SERVICE MODE AND ADJUSTMENTS.

GRUNDIG - BEKO IDTV SERVICE MODE and Adjustments.

                        To call up Service Mode.

  • Press "i" [INFO] button on the remote control.
  • Enter digits {8=>5=>0=>0} in sequence with in 3 seconds.
      BUTTON FUNCTIONS
  • "i" => Call up Dialogue Center | Close Down the Menu.
  • " P+ \ P- " => Call up dialogue line {point of menu}.
  • "Left | Right" => Call up Menus | Changing Settings.
  • "TXT" => to EXIT from service mode.
     SOFTWARE VERSION NUMBERS

The software version number is shown on the lower part of the Service Menu.  For example:
_________________________________________________________________________________SBL  1024.EU  01   T00  v1.13
30|11|07  16:23:10
_________________________________________________________________________________

     TV SOFTWARE
  • Press "AV' button.
  • Select "DIGITAL TV" with buttons {P+ | P-} and press "OK".
  • Press "i" button.(Main Menu).
  • Select "Features" with {P+ | P-} button & press "OK".
  • Select "Digital Features" with {P+ | P-} button, and call up with "OK" button.
  • Enter the digits {8500}.
  • The version number of software will be displayed.
  • Press "i" button, to close the software report.
     HOTEL MODE

Maximum volume is limited and there is no access to "Preset List" and "Setup" is activated  Hotel Mode.
  • Call Up:  "i" => 8500 => [P+ \ P-] => Option => Right button => [P+ \ P-] => Hotel => {Left or Right} button => "AVAIL".
  • Maximum Volume:  "i" => 8500 => [P+ | P-] => "OPTION-1" => 'Right Button =>  [P+ | P-] => "HOTEL VOLUME" => [Left or Right button] => {Select data value}  [Data value can be selected in between  "0 to 63"]
                    SPECIAL FUNCTIONS AT ACTIVATED HOTEL MODE
  • The maximum volume can be adjusted in the additionally menu item"Maxvol" in the sound menu.
  • In addition there is access to the menus "Preset List" and "Channel Settings"until the set is switched Off (Standby).
  • Call Up: "i" => 'Sound' => "OK" => "4658"
     DISPLAY

     If no picture is visible because of a wrong panel is adjusted, can change the setting by "Blind" adjust.  The following sequence of operation steps must be repeated until the picture is shown on the panel.

Call Up:  "i" => '8500' => {Right button} => {P-ve button 4 times} => {Right button} => "TXT" => Switch set Off and On.

     If picture is visible, then repeat the sequence once again and adjust the correct type of panel; according to panel display label.
Posted By: FRANK at 02:58
TAG: , , ,