REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday, 27 February 2019

HP TABLET DISASSEMBLING PROCEDURE - HP ELITE X2 1012 G1 – HOW TO REPLACE THE BATTERY – HOW TO REMOVE THE BACK COVER – HOW TO REMOVE THE DISPLAY – TABLET REPAIR AND SERVICE

HP Tablet disassembling procedure - HP Elite x2 1012 G1 – how to replace the battery – How to remove the back cover – How to remove the display – Tablet repair and Service

Category: Tablet repair and service 

Contents of this article 

  • How to remove the back cover  
  • How to remove the SSD 
  • How to removal the battery 

HP Elite x2 1012 G1

DISASSEMBLING PROCEDURE 
How to remove Back cover
Before removing the back cover, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
Keyboard (select products only)
Remove the back cover:
Remove the 6 Torx screws under the kickstand (1).
How to remove Display panel
Before removing the display panel, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard
b. Back cover
Remove the display panel:
1. Use a suction tool to loosen all 4 corners of the display panel (1), and then lift the display panel (2) to remove it.
2. Disconnect the touch board cable (1) and the display cable (2), and then remove the display panel (3).
How to remove Touch controller board
Before removing the touch controller board, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard)
b. Back cover
c. Display panel
Remove the touch controller board:
Remove the 2 Phillips screws (1), and then remove the touch controller board (2).
How to remove WLAN module
Before removing the WLAN module, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard
b. Back cover
c. Display panel
d. Touch controller board
Remove the WLAN module:
Remove 1 Phillips M2.0x2.0 screw (1), disconnect the 2 cables (2), slide the WLAN module to the right, and then remove it (3).
How to remove WWAN module
Before removing the WWAN module, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard
b. Back cover
c. Display panel
d. Touch controller board)
e. WLAN module
Remove the WWAN module:
Remove 1 Phillips M2.0x2.0 screw (1), disconnect the 2 cables (2), slide the WWAN module to the right, and then remove it (3).
How to remove Solid-state drive
Before removing the solid-state drive, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard
b. Back cover
c. Display panel
d. Touch controller board
e. WLAN module
Remove the solid-state drive:
1. Remove 1 Phillips M2.0x2.0 screw (1).
2. Slide the solid-state drive (2) to the right, and then lift the solid-state drive to remove it.
How to remove Battery
Before removing the display panel, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard
b. Back cover
c. Display panel
d. Touch controller board
e. WLAN module
f. WWAN module
g. Solid-state drive
h. Battery
Remove the battery:
1. Remove 5 silver Phillips M1.6x2.5 screws in numbered order left to right (1).
2. Remove 2 black Phillips M1.6x2 screws (2).
3. Disconnect the battery cable (3), and then lift the battery (4) to remove it.
Posted By: FRANK at 07:03
TAG: , , , ,