REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday, 5 February 2019

OLEVIA LCD TV – HOW TO UPDATE THE FIRMWARE EDID OLEVIA 227, 232, 427, 432, 527 AND 532

Olevia LCD TV – How to update the firmware EDID Olevia 227, 232, 427, 432, 527 and 532

How to update the software, EDID write in, ADC correction and ADC parameter adjustments
Olevia Firmware Updating Instructions
This process installs a new version of the firmware and fixes the past bugs.
Model: Olevia 227, 232, 427, 432, 527 and 532
Before installing you need:
1. A compatible USB thumb drive
2. A Computer with Microsoft® Windows® 2000 or Microsoft® Windows® XP operating systems.
1.To make sure that no other files are in the thumb drive.
2. It is highly recommended to print the instructions as a reference before installing.
Loading Instructions:
1. Review the available downloads, the bugs fixed, and the new features added.
2. Follow the instructions on the firmware download section to successfully download and load firmware into the TV. Note: USB thumb drive must be formatted in FAT32 for detection.
3. After you have located the firmware, download it to a thumb drive. There are five different files.
4. Turn TV off and insert the USB thumb drive into the TVs USB input.
5. Turn TV power on, OLEVIA screen will pop up and after a few seconds a blue bar and will appear on the lower part of the screen covering the whole image from left to right, then a red bar.
6. Once the firmware loading is complete the TV will turn on and initial Home/Showroom option screen will appear.
7. Check under OSD menu Firmware Version and make sure that it matches with that of thumb drive. (Menu => Setup => Firmware Version)
8. Take off the thumb drive.
9. For more help, please call our technical support at 1-866-9OLEVIA (965-3842)
EDID write in and ADC correction and Parameter Adjustment
1 EDID write in
1.1 EDID tools
1.2 EDID write in 1. PC（Notebook）
2. Software（EDID Write EEprom20060816.exe）and confirm Personal computer hard disk Have 2 files (1. C:\EDID Editor(including Hex files) 
2.C:\LCD TV\DATA(product and record had No.)
3. EDID PCBA tool, USB cable, RS232 mini din, Print cable, VGA cable
EDID write in
1. Open Labview EDID Writ Eeprom20060816 file, and confirm software Keep Running.（Refer Step 1）
2. Choice RS-232 (PC System)Port No.(Refer Step 2) choice burn in type (Refer Step 3)
3. Press Set Model button （Refer Step 4 , and key in 232-S12. and confirm Scalar solution（Refer Step 5）
4. Confirm EDID Jig PCBA (printer port and USB A-B Line connect to PC, HDMI line to TV first , MinDim RS-232 to TV)
5. and then press Button（Refer Step 6), then open a save file path in widow.
operate Barcode scanner scan S/N stick No.
6. First write HDMI EDID code , if finish OK you can find green light.（Refer Step 7）
7. And have a message that change EDID Jip PCBA VGA Cable to TV.(HDMI line must leave.
ADC correction and Parameter adjustment
ADC correction and Parameter adjustment tools：
1. PC（Notebook）
2. CHROMA 2325
3. MINOLTA CA-210
4. Software（Gamma Calculator6A_Jason.exe）
ADC correction Photo 1
Photo 2
Photo 3
1. Click the icon on the desk "Gamma Calculator" (please see Photo 1), and then Photo 2 would show up.
2. Click the icon "Gamma Calculator" of Photo 2, and then Photo 3 would show up.
3. Connect "RS232" &"VGA" with TV.
4. click the "arrow mark" (which is circle by red) in Photo 3, and then click the icon "ADC" also in Photo 3 blue circle.
5. The window will show up with the instruction about component, and then connecting component instead of VGA port.
6. The ADC process is completed once the window with the message "OK" shows up.
Attention
1. Please make sure it's under "VGA Source" before processing ADC.
2. Please pay attention to different solution for ATI/MTK8202/PW106 as Photo 3 green circle.
3. Please make sure the set-up for RS232 is correct.
Parameter adjustment
1. Click the icon on the desk "Gamma Calculator" (please see Photo 1), and then Photo 2 would show up.
2. Click the icon "Gamma Calculator" of Photo 2, and then Photo 3 would show up.
3. Please follow (as Photo 4 blue circle) to choose the solution & panel mode.
4. Connect the" RS232, USB, VGA changeful wire, and audio wire" with TV. And then connect the other side of VGA changeful wire with the pattern generator, and set up the TV source under "VGA". And please locate
the "CA-210" on center of TV screen.
5. Click "BL" button, and the window with "Gamma adjustment" message would show up. Please click "OK" for next step. (as Photo 4 red circle)
6. Adjust the GAMMA (R;G;B) and then click the button "Enter" after GAMMA adjustment is completed.(Please follow Photo 5, 6)
7. Please check the result.
Attention
Check pattern points for adjustment (CHROMA PROGRAM：71 1360_FT_VGA )：
1. Check if the frame is damaged and if the size is smaller than normal, or if those points in the 5 squares correspond well. (Photo 7)
2. Each gray bar should be identified with only pure color.(Photo 8)
3. 256 Gray. => R => check if there is sync (influenced by high frequency). (Photo 9)
Posted By: FRANK at 05:41
TAG: ,