Palsonic and Daewoo LCD TV – How to upgrade the firmware TFTV81HDT
How to upgrade the PIC micom How to upgrade the decoder – Palsonic and Daewoo TVs TFTV68HDT TFTV81HDT TFTV93HDT TFTV106HDT
How
to S/W Upgrade Tools
You
need followings to upgrade LCD TV.
Decoder S/W, *.ecc to be uploaded
PIC micom S/W, *.hex to be uploaded
- RS232 cable
- S/W upgrade tool
- Service remote controller.
Decoder S/W, *.ecc to be uploaded
PIC micom S/W, *.hex to be uploaded
- RS232 cable
- S/W upgrade tool
- Service remote controller.
Your
computer has 9-pin serial port and the port should not be conflicted with other
S/W.
While
upgrading, the power cord should not be unpluged.
Outline
of the S/W upgrade tool, which is DTV Updater.exe.
How
to upgrade decoder of LCD TV.
Execute
S/W upgrade tool, which is DTV_Updater.exe.
Select [Setting] > [Target] > [Decoder] in the menu.
Select [Setting] > [Target] > [Decoder] in the menu.
Select
available serial port in [Setting] > [Port].(Default port is COM1.)
Select
bitrate, which is [Setting] > [bits/second] > [115200] in the menu.
Open
the file, *.ecc to be uploaded in the decoder.
If the file is correctly selected, the file name is displayed as followings.
Do not check the option [Boot Sector include]
Click the [Upload] button.
Decoder is being upgraded.
Click the [Finish] button if the decoder upgrade has been finished.
And then turn off/on LCD TV with the power cord.
Open
the file, *.hex to be uploaded in the PIC
If
the file is correctly selected, the file name is displayed as followings.
Do not check the option [Boot Sector include].
Do not check the option [Boot Sector include].
Click
the [Upload] button.
Execute the AC off/on.
Execute the AC off/on.
PIC
is being upgraded
Click
the [Finish] button if the PIC upgrade has been finished as below.LCD TV will be automatically turned on