REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday, 13 February 2019

PHILIPS - 37PFL 5603D _ LCD TV _ SERVICE MODE & ADJUSTMENTS

PHILIPS - 37PFL 5603D _ LCD TV _ SERVICE MODE & ADJUSTMENTS



SERVICE DEFAULT MODE

Purpose:

  • To create a pre-defined setting, to get the same measurement result as given here
  • To override SW protections detected by standby processor and to make the TV start up to the step just before protection; a sort of automatic stew-wise start up.
  • To override SW protections detected by MIPS
  • To start the Blinking LED procedure
DEFAULT SDM SETTING

Region
Freq. [MHz]
Default system
Europe, AP [PAL/Multi]
475.25
PAL B/G
Europe, AP DVB-T
546.00 PID
Video: 0B 06 PID
PCR: 0B 06 PID
Audio: 0B 07
DVB-T
  • All picture settings at 50% [Brightness, Contrast, Color]
  • All sound settings at 50%, except volume at 25%
  • All service unfriendly modes; if present; are disabled, like sleep Timer - Child/Permanent Lock.
  • Picture mode mute. [Blue mute or Black mute]
  • Automatic volume levelling [AVL].
  • Skip / blank of non-favorite pre-sets.
TO ACTIVATE SDM [Service Default Mode]

  • Analogue SDM:  Use the standard remote control and key in code {0 =>  6 => 2 => 9 => 6}, directly followed by "Menu".  It is possible that, together with the SDM, the Main Menu will appear.  To switch it 'OFF', push the 'Menu' button again.
  • Digital SDM:  Use the standard remote control, key in {0 => 6 => 2 => 5 => 9 => 3}, directly followed by 'Menu' button.  It is possible that with the SDM, the Main Menu will appear.  To switch it OFF, push the 'Menu' button again.
  • Analogue SDM can also be activated by shorting for a moment the two solder pads on SSB, [see the figure given below], with the indication 'SDM'.  Activation can be performed in all modes, except when the set has a problem with the Stand-by processor.

  • After activating this mode, "SDM" will appear in the Upper Right corner of the screen.
TO NAVIGATE
  • When 'Menu' button is pressed, the set will toggle between the  SDM and normal user menu; with SDM mode still active in the background.
TO EXIT 'SDM'

Use one of the following methods
  1. Switch the Set to Standby, via remote control.
  2. Via standard customer remote control transmitter:  Key in "00" sequence
Posted By: FRANK at 02:36
TAG: ,