REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Saturday 2 February 2019

PHILIPS BDP3100, BDP3080, BDP5100 SMPS CIRCUIT DIAGRAM, SOFTWARE UPGRADE - BLU-RAY DISC PLAYER

Philips BDP3100, BDP3080, BDP5100 SMPS circuit diagram, Software upgrade - Blu-ray Disc Player


BDP3100/12/05/51/55/79/93/96/98/X78, BDP3080/98, BDP5100/12/05/51/93/98 Philips Blu-ray Disc Player - How to update the software, How to take the disc in emergency, Disc loader adjustments after repair
Loader repair Instruction for BDP3100,5100,3080/98
After scanning BARCODE on the new LOADER in supplier – TCL factory, print the one-dimensional code which generated by scanner and computer on label, then paste it into LOADER. If FA test passed, break off the protection point under the LOADER. Repair Procedure in workshop 1. In region’s workshop, to install loader in the machine then weld the open protection point.  Keep the set to connect the TV and power on, press keys “5” ”1” ”7” ”7” on Remote Control when in the HOME menu, then the menu will be displayed. 2. Select “Enter Barcode Info” from the menu, input the BARCODE of the LOADER and wait until the OSD displays “PASS”, press “STOP” key on Remote Control to go back to the menu. 3. Select “Laser check”, confirm whether the cable is connected and welded protection point is ok. 4. Restart the set, test CD, DVD, BD discs. If OK, the LOADER replacing procedure is finish.
How to take out the disc in emergency
If the tray can’t open in normal way or in the absence of power, you can make it through the instruction as below.
Note: Make sure to operate gently otherwise the guider would be damaged.
Software checks and upgrade
Preparation to upgrade software
1) Start the CD burning software & create a folder named "UPG_ALL",
2) Then copy the Bin file (BDP_3100_S_B.bin ) OR(BDP_5100_S_B.bin )into it,
3) Burn the data onto the blank CD or USB
4) If the model is BDP3100,must use (BDP_3100_S_X.bin )to upgrade If the model is BDP5100,must use (BDP_5100_S_X.bin )to upgrade X(A;B;C)If the model BD code is A,,X=A;BD code is B,X=B;BD code is C,X=C
A. Procedure for software upgrade
A) Upgrade software via Disc
1) Power on the set and insert the prepared Upgrade CDR
2. The set will start reading disc and response with the following display TV screen.
Now searching for the upgrade software, please wait….
                                       STILL
3) Press <OK> button to confirm, then screen will display :
An upgrade software has been found!
Start upgrade with version:WKXXX.X?
                        Cancel                   Start
4) Press Right cursor button to choose "Start", then press <OK>;
5) The software will upgrade and screen will display as below:
Upgrade is ongoing, Please wait…
Please do not unplug or switch off the device.
6) The screen will display as below when upgrading complete:
Upgrade has completed successfully!
Power off after 5s.
Power OFF
5) Restart the set.
SMPS (Power board) schematic and PWB
B) Upgrade software via network
1) Setup the network connection (See "Getting started">"Set up network").
2) In the Home menu, select <Setting> <Advanced Setup> <Software Download> <Network>.
* You are prompted to start upgrading processes if upgrade media is detected.
3) Follow the instructions on the TV screen to confirm update operation.
* Once software updated is complete, this player automatically turns off to standby.
4) Disconnect the power cord for a few seconds and connect again to turn on the player.
C) Update software via USB Flash Drive
1) Go to www.philips.com/support to check if the latest software
version is available for this player.
2) Download the software onto a USB flash drive.
3) Insert the USB flash drive to the USB jack of the rear panel.
4) In the Home menu, select <Setup> <Advanced Setup> <Software Updade > <USB>.
5) Follow the instructions on the TV screen to confrim update operation.
* Once software update is complete, this player automatically turns to standby.
6) Disconnect the power cord for a few seconds and connect again to turn on the player.
Read out the software versions to confirm upgrading
1) Power on the set and open the tray door.
2) Press <Home> button on the remote control
3) Select <Setup>, then press <OK>.
4) Select <Advanced Setup>, press right cursor to choose
<Version Info.>, then press <OK>, the software version and other information will display on the TV screen as below:
Model: BDP3XXX or   BDP5XXX
Versions:
http://www.philips.com/support
MAC:XX-XX-XX-XX-XX-XX
Caution The set must not be power off during upgrading; otherwise the Main board will be damaged entirely
Posted By: FRANK at 08:11
TAG: , , , ,