PHILIPS CLICK 32PFL3404_42PFL3604 _SERVICE MODE _ SOFTWARE UPDATE
SERVICE DEFAULT MODE
SHOWING THE ENTIRE ERROR BUFFER
The entire error buffer can be shown when the service mode “SDM” is inside (command by remote control <MENU> 062596). When the protection, this sequence does not function, error code LAYER-1 should be sufficient. To avoid confusion with the receiving signal from the remote control blinking, this procedure is finished flashing when a command control Remote is received.
TO ACTIVATE
Use one of the following methods:
- On the CSM. The front LED flashing display only the recent error LAYER-1.
- On the SDM. The front LED flashing display the entire contents of the error buffer Layer-2
SOFTWARE UPDATE
It
is possible for the user to update the software via the main door USB. A
description of how the software update page DFU can be found in and below:
Principal
Software Update
In “normal” conditions, when no major problems with the TV, the leading software and Implementation of standard update Software may be made to “upgrade.bin”. This can also be done by the consumer via the Wizard Updated Software in the user menu (see DFU), but he must Download this software to make a website of Philips.
HOW TO UPDATE
- Copy the file “upgrade.bin” to the root of the USB stick.
- Shut off the TV and remove all memory devices.
- Insert the USB stick containing the software updates downloaded.
- Turn on the TV and turn on the Main menu by pressing “Menu / House” on the remote control.
- From the Main Menu, go to the item “Software update”.
- Press the “OK” button to access the sub menu.
- Select “Local Updates” in the sub menu and press the “OK” to enter the Software Update application.
- You will be prompted to cancel or proceed with the update software.
- To proceed, select “Update” and press “OK” to enters the next menu. In the next menu, select “Start” and press the “OK” to start the software update.
- The update starts now and progress update will be shown. After the software update is complete, the TV will automatically reset.
Adjustments Software
Put your device in SAM. The menu will appear SAM Now the screen. Select the appropriate setting and access the sub menus by pressing “right arrow”. The adjustments are explained below:
Put your device in SAM. The menu will appear SAM Now the screen. Select the appropriate setting and access the sub menus by pressing “right arrow”. The adjustments are explained below:
The
following items can be adjusted:
- Tuner AGC.
- White Point
- Calibrating ADC VGA and YPbPr inputs
TO STORE THE DATA
- When displayed, select “Store” in the sub menu and reported press the “OK” on the remote control. The screen will change testo to “DO” for “OK”
- Press the MENU / House on the remote control.
- Connect the device in stand-by mode
To close adjustments, provide the following test signals
via a video generator to the input RF:
- EU / AP-PAL models: a TV signal PAL B / G with a sign at least one strong mV and a frequency of 475.25 MHz
- U.S. / AP-NTSC models: an NTSC TV signal M / N with a strong signal of at least 1 mV and a frequency of 61.25 MHz (channel 3).
- LATAM models: a TV signal with a signal NTSC M at least one strong mV and a frequency of 61.25 MHz (channel 3).
TO ACTIVATE SAM [SERVICE ALIGNMENT MODE]
- Dial the code [062596] followed directly by "+i / INFO"
TO ACTIVATE SDM [SERVICE DEFAULT MODE]
Enter the code [062596] directly followed by 'Menu' button or 'Home' button
Note: The new remote control is used with some keys renamed. This has an impact on activation of service mode.
For example, the "Menu" button is now called "Home" or as indicated by an icon "house".
Update HDMI EDID NVM
- To update the HDMI EDID, EDID pin 7 of NVM [1] has to be short-circuited to earth.
- To update the NVM VGA EDID pin 7 of NVM has to be short-circuited to earth.
