Philips LCD TV SMPS Circuit Diagrams
5000
SERIES 32”, 4100 SERIES 24”, 5000 SERIES 40” and 5000 SERIES 48” - Philips
LCD TV SMPS Circuit Diagrams.
All power supplies are a black box for Service. When defective, a
new board must be ordered and the defective one must be returned, unless the
main fuse of the board is broken; always replace a defective fuse with one with
the correct specifications. This part is available in the regular market. Consult
the Philips Service web portal for the order codes of the boards.
A 715G6550 PSU
A 715G6863 PSU
A 715G6934 – PSU
Power Supply Unit (PSU)
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU.
1. Gently unplug all connectors from the PSU.
2. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU.
1. Gently unplug all connectors from the PSU.
2. Remove all fixation screws from the PSU.
3. The PSU can be taken out of the set now.
Important delta’s with the TPM15.6L LA classis platform are
> New power architecture for LED backlight
> “Boost”-signal is now a PWM-signal + continuous variable.
The control signals are
> Stand-by (PS_ON)(only for 48 inch-715G6338)
> Lamp “on/off”
> New power architecture for LED backlight
> “Boost”-signal is now a PWM-signal + continuous variable.
The control signals are
> Stand-by (PS_ON)(only for 48 inch-715G6338)
> Lamp “on/off”
Backlight adjust (DIM) (not for PSDL)
The output voltages to the chassis are:
> 12V output (stand-by and on-mode for 32 and 40 inch)
> 8.5V output (stand-by for 48 inch)
> 12V output (on-mode for 48 inch)
> +12V_audio (audio AMP power) (on-mode)
> Output to the display; in case of
- IPB: High voltage to the LCD panel
- PSL and PSLS (LED-driver outputs)
- PSDL (high frequent) AC-current.
> 12V output (stand-by and on-mode for 32 and 40 inch)
> 8.5V output (stand-by for 48 inch)
> 12V output (on-mode for 48 inch)
> +12V_audio (audio AMP power) (on-mode)
> Output to the display; in case of
- IPB: High voltage to the LCD panel
- PSL and PSLS (LED-driver outputs)
- PSDL (high frequent) AC-current.
The diversity in power supply units is mainly determined by the diversity
in displays.
The following displays can be distinguished
> CCFL/EEFL backlight: power panel is conventional IPB
> LED backlight:
- side-view LED without scanning: PSL power panel
- side-view LED with scanning: PSLS power panel
- direct-view LED without 2D-dimming: PSL power panel
- direct-view LED with 2D-dimming: PSDL power panel.
> CCFL/EEFL backlight: power panel is conventional IPB
> LED backlight:
- side-view LED without scanning: PSL power panel
- side-view LED with scanning: PSLS power panel
- direct-view LED without 2D-dimming: PSL power panel
- direct-view LED with 2D-dimming: PSDL power panel.
[PSL stands for Power Supply with
integrated LED-drivers. PSLS stands
for a Power Supply with integrated LED-drivers with added Scanning functionality (added
microcontroller). PSDL stands for a Power Supply for Direct-view
LED backlight with 2D-dimming.]