PHILIPS - SRU 5130 REMOTE CONTROL_ SETUP PROCESS
SETTING THE REMOTE CONTROL
This is only necessary if your
device does not respond to the SRU 5130. If that is the case, the SRU 5130 does
not recognize the brand and/or model of your device and you need to program the
remote control to do so.The example below (TV) instructs you how to do this. You can repeat the same steps for other
devices (Set Top Box, DVD player/ recorder or VCR) which you want to operate
using the SRU 5130.
The SRU 5130 is default set
for operating TV, STB or DVD.You can select the device you wish to operate with
the TV, STB and DVD keys. Each mode key allows operation of one device only. If
desired, you can program the keys to select a different kind of device. For
example, if you want to operate a second TV. In the following example you will
see how to configure the DVD key for a second TV.
- Switch on the second TV. Press the DVD key to select DVD. The key lights up.
- Then keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until the DVD key lights up.
- Press keys 9, 9 and 2 in that order.
- Press the TV key to select TV.
- Press the key until it flashes twice and then remains lit.
- The DVD key flashes twice. The DVD key will now allow you to operate your second TV.
Program the SRU 5130 to operate the second TV.
RESTORING THE ORIGINAL FUNCTIONS OF THE REMOTE CONTROL
- Keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until one of the mode keys (TV, STB or DVD) flashes twice and then remains lit.
- Press keys 9, 8 and 1, in that order.
- The mode key (TV, STB or DVD) flashes twice. All original functions have now been restored and any extra functions have been deleted.
Some combo devices require you
to set up two different source selection keys to control both parts of the
combo device. For example, if you have a TV/DVD combo, you might need to set up
one code under the TV key to control the TV and a separate code under the DVD
key to control the DVD.
