P27720HD Samsung LCD monitor – How to enter service mode – Self check
Self
check mode and service mode – Samsung P2770HD LCD monitor
Self-Test Feature Check
The monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer
3. Turn on the monitor. If the monitor is functioning properly, you will see a box displayed.
This display box appears during normal operation if the video cable becomes disconnected or damaged.
4. Turn off your
monitor and reconnect the video cable; then turn on both your computer
and the monitor. If your monitor screen remains blank after using the
previous procedure, check your video controller and computer system;
your monitor is functioning properly.
Warning
Messages
If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment
The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.
The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.
A
monitor recreates visual signals received from the computer.
Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.
Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.
If there is no
image on the screen or a “Not Optimum Mode”, “Recommended Mode 1920 X
1080 60Hz” message comes up, disconnect the cable from the computer
while the monitor is still powered on.
- If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition.
- In this case, check the computer for trouble.
Entering
Factory Mode [Service mode]
To
enter “Service Mode” Press the remote -control keys in this sequence :
- If you do not have Factory remote – control
- If you do not have Factory remote – control
The
buttons that are active in the service mode. (See the above picture)
1. Remote
- Control Key : Power, Arrow Up, Arrow Down, Arrow Left Arrow Right, Menu,
Enter, Number Key(0~9)
2. Function - Control Key : Source(ENTER), Menu, VOL-, VOL+, CH-, CH+, POWER.
2. Function - Control Key : Source(ENTER), Menu, VOL-, VOL+, CH-, CH+, POWER.
Self check feature test
